You must insert or replace the batteries in the remote control when
you:
◆Purchase the PDP Monitor
◆Find that the remote control is no longer operating
correctly
1Remove the cover on the rear of the remote control by pressing
the symbol ( ) downwards and then pulling firmly to remove it.
2Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking
care to respect the polarities:
◆
-
on the battery against
-
on the remote control
◆
+
on the battery against
+
on the remote control
3Replace the cover by aligning it with the base of the remote
control and pressing it back into place.
Do not mix battery types, i.e. alkaline and manganese.
Inserting the Batteries in the Remote ControlAssembling the Stand-Base
1Assemble the PDP Monitor with the stand and firmly
secure the PDP Monitor using 4 screws provided.
➢
Two or more people should carry the PDP Monitor.
Never lay the PDP Monitor on the floor because of
possible damage to the screen.
Always store the PDP Monitor upright.
English - 9
BN68-00848A-00Eng_0404 4/4/05 3:57 PM Page 9