Samsung PS-50P7H, PS-42P7H manual Setting UpYour Remote Control

Setting UpYour Remote Control

Setting Up the Remote to Operate Your DVD 1 Turn off your DVD.

2 Press the DVD button on your TV’s remote control.

3Press the SET button on your TV’s remote control.

4 Using the number buttons on your remote control, enter three digits of the DVD code listed on page 52 of this manual for your brand of DVD. Make sure you enter three digits of the code, even if the first digit is a “0”. (If more than one code is listed, try the first one.)

5 Press the POWER button on the remote control.

Your DVD should turn on if your remote is set up correctly.

If your DVD does not turn on after set-up, repeat steps 2, 3 and 4, but try one of the other codes listed for your brand of DVD. If no other codes are listed, try each code, 000 through 141.

Note on Using Remote Control Modes: DVD

When your remote control is in “DVD” mode, the volume buttons still control your

TV’s volume.

Setting Up the Remote to Operate Your Set Top Box 1 Turn off your STB.

2 Press the STB button on your TV’s remote control.

3Press the SET button on your TV’s remote control.

4 Using the number buttons on your remote control, enter three digits of the STB code listed on page 51 of this manual for your brand of STB. Make sure you enter three digits of the code, even if the first digit is a “0”. (If more than one code is listed, try the first one.)

5 Press the POWER button on the remote control.

Your STB should turn on if your remote is set up correctly.

If your STB does not turn on after set-up, repeat steps 2, 3 and 4, but try one of the other codes listed for your brand of STB. If no other codes are listed, try each code, 000 through 074.

Note on Using Remote Control Modes: STB

When your remote control is in “STB” mode, the volume buttons still control your

TV’s volume

continued...

English - 49