Yamaha RX-V2600 Press k / n repeatedly to select Wiring, For Equalizing, press k / n to select

AUTO SETUP

5Press k / n repeatedly to select Wiring,

Distance, Size, Equalizing or Level and then press h.

Skip

Wiring Check

Distance

Size

Wiring	Skip
Distance	Check
Size
Equalizing

For Equalizing, press k / n to select:

Skip To skip the selected item and perform no adjustments.

Check: Natural To average out the frequency response of all

	speakers with higher frequencies being less
	emphasized. Recommended if the “Flat”
	setting sounds a little harsh.
Check: Flat	To average the frequency response of all
	speakers. Recommended if all of your
	speakers are of similar quality.
Check: Front	To adjust the frequency response of each
	speaker in accordance with the sound of
	your front speakers. Recommended if your
	front speakers are of much higher quality
	than your other speakers.

Wiring
Distance	Skip
Size	Check
Equalizing
Level
Distance
Size	Skip
Equalizing	Check: Natural
Level	Check: Flat
	Check: Front

7Once you have selected the desired setting, press l to move back to Setup Menu.

Information
Setup Menu	Wiring
Setup Type	Distance
Start	Size

Size
Equalizing	Skip
Level	Check

6For Wiring, Distance, Size or Level, select:

Check	To automatically check and adjust the selected
	item.
Skip	To skip the selected item and perform no
	adjustments.

y

When using THX speakers, select “Skip” for Size and make sure that “Small” or “Small x2” is selected in Speaker Set (see page 83) and that “80Hz” is selected in Bass Cross Over (see page 85).

8Press n to select Setup Type and then select:

Auto	To automatically perform the entire
	AUTO SETUP procedure.
Step	To pause for confirmation between
	each check in the AUTO SETUP
	procedure.
Information
Setup Menu
Setup Type		Auto
Start		Step

34