Use this menu to set up basic system parameters.
1Set AMP/SOURCE/TV to AMP and then press GUI TOP on the remote control.
AMP | GUI TOP |
| |
SOURCE | TITLE |
| BAND |
TV |
|
2Press k / n on the remote control to select Manual Setup and then press h.
PRESETPRESET
ENTER | ENTER |
A/B/C/D/E | A/B/C/D/E |
PRESETPRESET
ENTER | ENTER |
A/B/C/D/E | A/B/C/D/E |
Sound |
|
Video | Test Tone |
Basic | Speaker Set |
Option | Speaker Distance |
| Speaker Level |
4Select the desired parameters and then press h to access and adjust.
PRESET
ENTER
A/B/C/D/E
SYSTEM OPTIONS
Turns the test tone output on or off for Speaker Set, Speaker Distance and Speaker Level settings.
Manual Setup > Basic > Test Tone >
Choices: Off, On
Test Tone | Off |
Speaker Set | On |
Speaker Distance |
|
y
If you use a handheld SPL meter, hold at arms length and point upwards so that the meter is in the listening position. With the meter set to the 70 dB scale and to C SLOW, calibrate each speaker to 75 dB.
Note
Loud test tones will be output when “On” is selected. In this case, make sure no children are present in the listening room.
Use to manually adjust any speaker setting.
Manual Setup > Basic > Speaker Set >
Choices: Front, Center, Surround, Surround Back, Presence, Bass Out, Bass Cross Over, SWFR Phase
| Bass Cross Over |
Test Tone | SWFR Phase |
Speaker Set | Front |
Speaker Distance | Center |
Speaker Level | Surround |
y
If you are not satisfied with the bass sounds from your speakers, you can change these settings according to your preference.
Note
Set any THX speakers to Small.
OPERATION | ADVANCED |
|
|
y
•Most of the parameters described in the basic menu are set automatically when you run AUTO SETUP. You can use the basic menu to make further adjustments, but we recommend running AUTO SETUP first.
•You can reset these parameters by performing the AUTO SETUP procedure (see page 32).
English
83