CONTROLS AND FUNCTIONS
This section describes the function of each control on the Zone 2/Zone 3 remote control used to control Zone 2 or Zone 3.
|
|
|
| POWER |
|
|
|
|
|
| 5 |
| TUNER | CD | STANDBY |
| |
| 1 | 2 | 3 |
| 6 |
| DTV | CBL/SAT MD/TAPE | PHONO |
| |
1 | 4 | 5 | 6 | ENT |
|
| VCR1 | DVR/VCR2 | DVD |
| |
| 7 | 8 | 9 | 0 |
|
| + | + |
|
| |
2 | PRESET | VOLUME | 7 | ||
| – | – |
|
| |
| A/B/C/D/E |
|
|
| |
3 |
|
| MUTE |
| 8 |
ID1 ID2 | ZONE 2 ZONE 3 |
4 | 9 |
Select the desired input source of Zone 2 or Zone 3 and change the control area.
Selects the preset station number (1 to 8) when TUNER is selected as the input source or Zone 2 or Zone 3.
Selects the preset station group (A to E) when TUNER is selected as the input source or Zone 2 or Zone 3.
Switches the remote control ID between ID1 and ID2 (see page 99).
Turns on Zone 2 or Zone 3.
Note
This button is operational only when MASTER ON/OFF on the front panel is pressed inward to the ON position.
Sets Zone 2 or Zone 3 to the standby mode.
Note
This button is operational only when MASTER ON/OFF on the front panel is pressed inward to the ON position.
Increases or decreases the volume level or Zone 2 or Zone 3.
Mutes the sound of Zone 2 or Zone 3.
Press again to restore the audio output to the previous volume level.
Switches between the operation mode of Zone 2 and that of Zone 3.
10