source
You can display the type, format and sampling frequency of the current input signal.
1Set AMP/SOURCE/TV to AMP and then press GUI TOP on the remote control.
The top display appears.
AMP | GUI TOP |
| |
SOURCE | TITLE |
| |
| BAND |
TV |
|
Stereo/Surround | Sound |
Input Select | Video |
Manual Setup | Basic |
Auto Setup | Option |
System Memory |
|
PRESETPRESET
ENTER | ENTER |
A/B/C/D/E | A/B/C/D/E |
The following information appears.
PRESET |
|
|
| |
| Auto Setup | Audio Info. | Video | |
| System Memory | Format | - - - | |
| Sampling | 48kHz | ||
|
| |||
ENTER | Signal Info. | Channel | ??? | |
Bitrate | - - - | |||
|
| |||
A/B/C/D/E | Language | Dialogue | - - - | |
|
| Flag1 | - - - | |
|
| Flag2 | - - - | |
| Auto Setup | Video Info. | Audio | |
| System Memory | HDMI Signal | ||
| - - - | - - - | ||
|
| |||
| Signal Info. | HDMI Resolution | ||
|
| - - - | - - - | |
| Language | Analog Resolution | ||
|
| 480i | 480i |
PLAYBACK
Signal format display. When the unit cannot detect a digital signal, it automatically switches to analog input.
Sampling frequency. When the unit is unable to detect the sampling frequency “?” appears.
Number of source channels in the input signal. For example, a
Bit rate. When the unit is unable to detect the bit rate “– –
Dialogue normalization information for Dolby Digital and DTS signals.
Flag data encoded in Dolby Digital, DTS and PCM signals that cue this unit to automatically switch decoders.
Type of the HDMI signals input or output at the HDMI IN/OUT jacks of this unit.
Resolution of the HDMI signals input or output at the HDMI IN/OUT jacks of this unit.
Resolution of the analog signals input or output at the video component jacks of this unit.
EXIT
MENU
OPERATION | BASIC |
|
|
English
45