Manuals / Yamaha / Home Audio / Stereo System

Yamaha RX-V2600 Auto Setup, Before AUTO SETUP, During AUTO SETUP, Error message, Cause, Remedy

Models: RX-V2600

1 135

Download 135 pages 8 Kb

Page 121

TROUBLESHOOTING

■AUTO SETUP

Before AUTO SETUP

	Error message	Cause	Remedy	See
	Error message	Cause	Remedy	page
				page

	Connect MIC!	Optimizer microphone is not connected.	Connect the supplied optimizer microphone to the	32
	Connect MIC!	Optimizer microphone is not connected.	OPTIMIZER MIC jack on the front panel.	32
			OPTIMIZER MIC jack on the front panel.

	Unplug Phones!	Headphones are connected.	Unplug the headphones.	—

	No Setup Menu!	No setup menu items have been selected.	Select at least one setup menu item.	—

	Memory Guard!	This setting is protected.	Remove the protection setting for AUTO SETUP.	91

During AUTO SETUP

	Error message	Cause	Remedy	See
	Error message	Cause	Remedy	page
				page

			Select the front speakers by pressing SPEAKER A or
		Front L/R channel signal(s) is (are) not	B on the front panel (or by setting AMP/SOURCE/	—
	E01:No Front SP		TV to AMP and then pressing SPEAKER A or B on	—
			TV to AMP and then pressing SPEAKER A or B on
		detected.	the remote control).
		detected.	the remote control).

			Check the front L/R speaker connections.	15

	E02:No Surr. SP	A surround channel signal is not detected.	Check the surround speaker connections.	15

	E03:No PRNS SP	A presence channel signal is not detected.	Check the presence speaker connections.	15

		Only right surround back channel signal is	Connect the surround back speaker to the LEFT
	E04:SBR–>SBL	Only right surround back channel signal is	SURROUND BACK SPEAKERS terminal if you	15
	E04:SBR–>SBL	detected.	SURROUND BACK SPEAKERS terminal if you	15
		detected.	only have one surround back speaker.
			only have one surround back speaker.

			Try running AUTO SETUP in a quiet environment.	—
	E05:Noisy	Background noise is too loud.
	E05:Noisy	Background noise is too loud.	Turn off noisy electric equipment like air conditioners	—
			Turn off noisy electric equipment like air conditioners
			or move them away from the optimizer microphone.
			or move them away from the optimizer microphone.

		Surround back speaker(s) is (are)	Connect surround speakers when you use (a)
	E06:Check Surr.	connected, though surround L/R speakers	Connect surround speakers when you use (a)	15
	E06:Check Surr.	connected, though surround L/R speakers	surround back speaker(s).	15
		are not.	surround back speaker(s).
		are not.

	E07:No MIC	The optimizer microphone was unplugged	Connect the supplied optimizer microphone to	32
	E07:No MIC	during the AUTO SETUP procedure.	OPTIMIZER MIC jack on the front panel.	32
		during the AUTO SETUP procedure.	OPTIMIZER MIC jack on the front panel.

	E08:No Signal	The optimizer microphone does not detect	Check the microphone setting.	32
		The optimizer microphone does not detect
		test tones.	Check the speaker connections and placement.	15
		test tones.


	E09:User Cancel	The AUTO SETUP procedure was	Run AUTO SETUP again.	32
	E09:User Cancel	cancelled due to user activity.	Run AUTO SETUP again.	32
		cancelled due to user activity.

	E10:Internal Err	An internal error occurred.	Run AUTO SETUP again.	32

INFORMATION	ADDITIONAL


English

119

Image 121

Yamaha RX-V2600 owner manual Auto Setup, Before AUTO SETUP, During AUTO SETUP, Error message, Cause, Remedy

Contents

AV Receiver Ampli-tuner audio-vidéo RX-V2600MANUAL DE INSTRUCCIONES GEBRUIKSAANWIJZING For U.K. customers CAUTION READ THIS BEFORE OPERATING YOUR UNITSpecial Instructions for U.K. Model AUTO SETUP CONTENTSFM/AM TUNING CONTROLS AND FUNCTIONSBuilt-in 7-channel power amplifier FEATURESSound field features Other featuresGETTING STARTED Supplied accessoriesInstalling batteries Installing batteries in the remote controlsZone 2/Zone 3 remote control 1 Press the part and slide the battery compartment cover offOpening and closing the front panel door Handling the remote controlCONTROLS AND FUNCTIONS 7 PRESET/TUNING l / h3 4 5 6 7 8 9 0 A B C D E 1 MASTER ON/OFFB TUNING MODE AUTO/MAN’L, DISPLAY 9 PRESET/TUNING EDITD Remote control sensor N VOLUMERemote control H VOLUME + C POWERS Radio Data System tuning buttons U.K. and Europe models only B STANDBY2 PRESET + Zone 2/Zone 3 remote control4 ID1/ID2 switch 5 POWERA MEMORY indicator 1 YPAO indicator2 HDMI indicator 3 CINEMA DSP indicatorK LFE indicator J 96/24 indicatorL Input channel and speaker indicators Input channel indicators Presence and surround back speaker indicatorsRear panel A HDMI IN/OUT connectors1 DIGITAL OUTPUT jacks 2 DIGITAL INPUT jacksCONNECTIONS Before connecting speakersFront speakers FR and FL Center speaker CConnecting to the speaker terminals Connecting speakersDi-pole speaker layout FRONT terminals4 Insert one bare wire into the hole on the side of each terminal 3 Loosen the knob using the supplied speaker terminal wrench1 Open the tab 2 Insert one bare wire into the hole of each terminal Connecting the banana plug3 Return the tab to secure the wire Speaker layoutSINGLE SB Presence speakersBi-wire connection Using bi-wire and bi-AMP connectionsConventional connection Bi-AMP connectionCable indications Information on cables and jacks used for connectionsAnalog jacks Digital jacksAudio jacks Audio signal flow for OUT RECHDMI DIGITAL AUDIO COAXIAL DIGITAL AUDIO OPTICAL AUDIO AUDIO jacksVideo jacks Video signal flow for MONITOR OUTHDMI COMPONENT VIDEO S VIDEO VIDEO VIDEO jacksHDMI out DVD Player Connecting HDMI componentsCable TV or HDMI outConnecting a DVD player Connecting video componentsVideo in Connecting other video components Connecting to the VIDEO AUX jacks on the front panel Connecting to the MULTI CH INPUT jacksCD recorder Connecting audio componentsMD recorder or tape deck CD player1 FRONT PRE OUT jacks Connecting an external amplifier2 SURROUND PRE OUT jacks 3 SUBWOOFER PRE OUT jackConnecting the AM loop antenna Connecting the antennas1 Set up the AM loop antenna 3 Orient the AM loop antenna for the bestConnecting the AC power cable Connecting the power cableAC OUTLETS SWITCHED Turning on and off this unitADVANCED SETUP SP IMP.-8 MIN Setting the speaker impedancepower of this unit modeOptimizer microphone setup AUTO SETUPWiring Introduction1 Switch on this unit and video monitor Using AUTO SETUP3 Press k / n repeatedly to select Auto Setup and then press h 4 Press k / n repeatedly to select Setup Menu and then press h6 For Wiring, Distance, Size or Level, select 5 Press k / n repeatedly to select Wiring8 Press n to select Setup Type and then select Distance, Size, Equalizing or Level and then press hIf you set Setup Type to “Step” If you set Setup Type to “Auto”Confirming the results 9 Press n to select Start and then press ENTERPage PLAYBACK 2 Turn on the power of the video monitorBasic operations INPUTDialNorm+4dB the volume to the desired output levelMUSIC A Hall in Vienna L RUsing SILENT CINEMA Adjusting the tonal quality1 Press MUTE on the remote control 2 Press MUTE again or press VOLUME +/- to resume the sound outputEnjoying multi-channel software in 6.1/7.1 channel surround Selecting the MULTI CH INPUTAuto DecodersEnjoying 2-channel software in surround 2 Press SELECT on the remote control to select a decoderDecoder types for the Enhanced, MOVIE THEATER or THX program Decoder types for the Surround programUsing the night listening modes Using PURE DIRECTEffect.LvlMID Using the sleep timer 120min VOLUMEListening to unprocessed input signals 2ch StereoPlaying video sources in the background Virtual CINEMA DSPSelecting audio input modes AUTOHDMI Signal 2 Press n repeatedly to select Signal Info. and then press hHDMI Resolution Analog ResolutionRECORDING 1 Turn on the power of this unit and all connected componentsNotes on the DTS software 4 Start recording on the recording componentAutomatic tuning FM/AM TUNING3 Press TUNING MODE AUTO/MAN’L repeatedly so that the AUTO indicator lightsAutomatic preset tuning Manual tuning2 Press TUNING MODE AUTO/MAN’L repeatedly so that the AUTO indicator 3 Press PRESET/TUNING l / h to manually tune into the desired station1 Repeat steps 1 and 2 in “Automatic tuning” Customized automatic preset tuningC8FM 87.50MHz StraightC3AM Manual preset tuningSci-Fi Sci-Fi6 Repeat steps 1 to 5 to store other stations Selecting preset stationsC3AM Sci-Fi1,3 2,4 Exchanging preset stationsE1FM 87.50MHz E1FMReceiving Radio Data System stations PS Program Service name modeChanging the Radio Data System mode PTY Program Type modePTY SEEK function 3 Press PRESET k / n to select the desired program type2 Press PTY SEEK MODE to set this unit in the PTY SEEK mode POP M1 Check that the EON indicator is lit in the front panel display To cancel this functionEON function Changing parameter settings What is a sound field?EDITING SOUND FIELD PARAMETERS Elements of a sound field3 Press EXIT on the remote control to exit 5 Press EXIT on the remote control to exitInitializing sound field programs 2 Press k / n repeatedly to select Stereo/Surround and then press hFor movie/video sources SOUND FIELD PROGRAM DESCRIPTIONSSOUND FIELD PROGRAMSEnglish SOUND FIELD PROGRAM DESCRIPTIONSMULTI For music sourcesSOUND FIELD PARAMETER DESCRIPTIONS Init. Delay Initial delayDSP Level DSP level Room Size Room sizeSB. Init. Delay Surround back initial delay Sur. Init. Delay Surround initial delayLiveness Liveness Sur. Room Size Surround room sizeRev. Time Reverberation time Rev. Delay Reverberation delayRev. Level Reverberation level Large value = 5.0 sDialogue Lift Dialog lift Dimension DimensionFor 2ch Stereo For 7ch StereoFor THX Cinema Decode Type Decoder type For MOVIE THEATERFor SURROUND Standard For SURROUND EnhancedFront left speaker SOUND FIELD PROGRAM SPEAKER LAYOUTSPresence left speaker Surround right speaker5.1/6.1-channel 2-channel audio5.1/6.1-channel monaural2-channel audio 2-channel audio5.1/6.1-channel 5.1/6.1-channelWhen PR/SB Priority When PR/SB Priority2-channel audio monauralSYSTEM OPTIONS Manual Setup Manual setup menuStereo/Surround Stereo/Surround menu Input Select Input select menuSignal Info. Signal information menu Auto Setup Auto setup menuSystem Memory System memory menu Language GUI language menu5 Press EXIT 3 Press k / n repeatedly to select the parameter you want to adjustChanging parameter settings Memory back-upInput Select Volume Trim Volume trimming2 Select Input Select and then press h Rename Rename 5 Press l / h to select OK and press ENTER when completeI/O Assignment Input/output assignment 3 Press ENTER to select a character type CAPITAL/SMALL/FIGURE/MARKDecoder Mode Decoder mode Audio Select Audio selectionMulti CH Assign Multi channel assignment Input Channels Input channels3 Press k / n on the remote control to select Sound and then press h Manual Setup Sound4 Select the desired parameters and then press h to access and adjust LFE Level Low-frequency effect level2 Press h to access the settings window 1 Press k / n to select Test Tone or the speaker you want to adjust4 Press n to select EDIT and press ENTER to access the edit window Dynamic Range Dynamic rangeTone Control Tone control 6 Select EXIT and press ENTER to exit the settings windowAudio Option Audio options 5 Repeat steps 3 and 4 until you are satisfied with the resultsInitial Volume Initial volume Audio Delay Audio delayMax Volume Maximum volume PR/SB Priority Presence/surround back speaker prioritySpeaker settings Manual Setup Video3 Press k / n on the remote control to select Video and then press h Channel Mute Channel muteComponent I/P Component interlace progressive Conversion Video conversionHDMI Up-Scaling HDMI up-scaling Short Message Short message HDMI Aspect HDMI aspect ratioPosition Position Wall Paper Wall paper3 Press k / n on the remote control to select Basic and then press h Manual Setup BasicTest Tone Test tone Speaker Set Speaker setCenter Center speaker Front Front speakersSurround Surround left/right speakers Surround Back Surround back left/right speakersSpeaker Distance Speaker distance SWFR Phase Subwoofer PhasePresence Presence speakers Bass Out Bass outSpeaker distances Speaker Level Speaker levelUnit Unit THX Set THX settings Manual Setup Option3 Press k / n on the remote control to select Option and then press h SB Speaker Dist. Surround back speaker distanceMulti Zone Multi zone Dimmer DimmerSpeaker B Speaker B Zone3 Amplifier Zone 3 amplifier Zone2 Amplifier Zone 2 amplifierZone3 Volume Zone 3 volume Zone2 Volume Zone 2 volumeZone2 OSD Zone 2 on-screen display Memory Guard Memory Guard Sur.Initialize Surround initializeSound field program groups cannot be initialized when Memory Guard is set to “On” see page Audio Select Audio selectionTo save settings HDMI Set HDMI settings5 Press ENTER to save settings System Memory5 Press ENTER to load settings To load settingsLanguage 3 Select Load and then press ENTERUsing ADVANCED SETUP ADVANCED SETUPUser preset PRESET Speaker impedance SP IMPRemote control AMP ID REMOTE AMP Wake on RS-232C access WAKE ON 232CRemote control tuner ID REMOTE TUN Video reset V-RESETControl area REMOTE CONTROL FEATURESControlling this unit Controlling other components9 ll Controlling each componentRemote control code default settings Setting remote control codes1 Set AMP/SOURCE/TV to SOURCE Setting remote control tuner codes Setting remote control AMP codes8 Press LEARN again to exit from the setup mode 5 Press ENTER2 Press an input selector button to select a source component Using LEARN1 Set AMP/SOURCE/TV to SOURCE 5 to 10 cm5 Press the button for which you want to program the new function 4 Press LEARN using a ballpoint pen or similar object7 Press LEARN again to exit the learning mode 3 Press RE-NAME using a ballpoint pen or similar object Using RE-NAME1 Set AMP/SOURCE/TV to AMP or SOURCE 4 Press k / n to select and enter a characterCD area Using MACROCD area *4 MD/TAPE area *4MACRO operations 2 Press MACRO using a ballpoint pen or similar objectProgramming MACRO operations 1 Set MACRO ON/OFF to ON 2 Press a macro button2 Press CLEAR by using a ballpoint pen or similar object Using CLEARBasic CLEAR operations 3 Press k / n to select the clear modeClearing a learned function 3 Press LEARN using a ballpoint pen or similar object5 Release the object used to press CLEAR to exit the clearing mode 6 Press LEARN again to exit4 Press CLEAR to exit the clearing mode Clearing a macro function5 Press MACRO again to exit 2 Press MACRO using a ballpoint pen or similar objectUsing the external amplifiers Connecting the Zone 2 and Zone 3 componentsZONE 2/ZONE IMPORTANT SAFETY NOTICE Using the internal amplifiers of this unitSelecting Zone 2 or Zone Front panel operations1 Set AMP/SOURCE/TV on the remote control to AMP Remote control operationsControlling Zone 2 and Zone Selecting the input source of Zone 2 or ZoneAdjusting the volume level of Zone 2 or Zone Using the control mode of Zone 2 and ZoneAdjusting the tonal quality of Zone 2 or Zone Displaying the Zone 2 on-screen displayHDMI What is HDMI?HDMI compatibility with this unit Converting analog video signals to HDMI Setting the HDMI parametersSetting the HDMI support audio Basic HDMI operationsGeneral TROUBLESHOOTINGProblem CauseTROUBLESHOOTING ProblemINFORMATION ADDITIONALCause ProblemRemedy Problem TunerINFORMATION ADDITIONALProblem Remote control“LIST OF REMOTE CONTROL CODES” at the end CauseBefore AUTO SETUP AUTO SETUPDuring AUTO SETUP Error messageHDMI After AUTO SETUPError message Warning messageAudio information GLOSSARYASA Advanced Speaker Array Dolby DigitalNeo6 LFE 0.1 channelPCM Linear PCM Sampling frequency and number of quantized bitsTHX Music Mode THX Games ModeTHX Select2 THX Select2 Cinema modeComposite video signal Component video signalS-video signal Video informationFrequency Parametric equalizer informationGain Q factorAUDIO SECTION SPECIFICATIONSVIDEO SECTION FM SECTIONSpecifications are subject to change without notice GENERALLISTE DER FERNBEDIENUNGSCODES LISTA ÖVER FJÄRRKONTROLLKODER LIST OF REMOTE CONTROL CODES LISTE DES CODES DE COMMANDELISTA DEI CODICI DI TELECOMANDO LISTA DE CÓDIGOS DE MANDO A DISTANCIA LIJST MET AFSTANDSBEDIENINGSCODESLD PLAYER DVD RECORDERTAPE DECK MD RECORDERBEKO Page MANESTH WG00020 Printed in Malaysia2005 All rights reserved