REMOTE CONTROL FEATURES
You can change the name of the input source that appears in the display window on the remote control if you want to use a different name than the factory preset. This is useful when you have set the input selector to control a different component.
AMP
SOURCE
TV
2Press an input selector button to select the source component you want to rename.
The selected component name appears in the display window.
A | B | AUDIO SEL | SLEEP |
PHONO | TUNER | CD | MULTI CH IN |
CBL/SAT | MD/TAPE | ||
DTV | VCR 1 | DVR/VCR2 | DVD |
Note
If you do not complete each of the following steps within 30 seconds, the renaming mode will be automatically canceled. In this case, press
Pressing n changes the character as follows:
A to Z, 1 to 9, 0, + (plus), – (hyphen), ; (semicolon),
/ (slash), and space.
(Pressing k changes the characters in reverse order.)
PRESET
ENTER
A/B/C/D/E
PRESET
ENTER
A/B/C/D/E
OK appears in the display window if renaming was successful.
NG appears in the display window if renaming was unsuccessful. In this case, start over from step 4.
y
If you continuously want to rename another component, press the input selector button or SELECT k / n to select the component and then repeat steps 4 through 6.
Note
ERROR appears in the display window if you press a button not indicated in the respective step, or when you press more than one button simultaneously.
102