Manuals / Yamaha / Home Audio / Stereo System

Yamaha RX-V2600 Video jacks, Video signal flow for MONITOR OUT, S VIDEO jacks, HDMI jacks

Models: RX-V2600

1 135

Download 135 pages 8 Kb

Page 24

CONNECTIONS

■Video jacks

This unit has four types of video jacks (composite, component, S-video and HDMI). Connection depends on the availability of input jacks on your monitor. When Conversion is set to On (see page 81), the analog video signals input at the VIDEO, S VIDEO and COMPONENT VIDEO jacks can be output at the VIDEO, S VIDEO and COMPONENT VIDEO jacks interchangeably. In addition, when Conversion is set to On (see page 81) and HDMI Up-Scaling is set to On (see page 81), the analog video signals input at the VIDEO, S VIDEO and COMPONENT VIDEO jacks can be digitally up-converted and output at the HDMI OUT jack.

		COMPONENT VIDEO
VIDEO	S VIDEO	Y	PB	HDMI
				PR

VIDEO jacks

For conventional composite video signals.

S VIDEO jacks

For S-video signals, separated into luminance (Y) and color (C) video signals to achieve high-quality color reproduction.

COMPONENT VIDEO jacks

For component signals, separated into luminance (Y) and color difference (PB, PR) to provide the best quality in picture reproduction.

HDMI jacks

For HDMI digital video signals.

■Video signal flow for MONITOR OUT

Input	Output
	(MONITOR OUT)

HDMI

COMPONENT

VIDEO

S VIDEO

VIDEO

Through

Component I/P (see page 81) only when Conversion is set to On (see page 81)

HDMI Up-Scaling (see page 81) only when Conversion is set to On (see page 81)

Digital video

Analog video

Notes

•The analog video signals output at the COMPONENT VIDEO jacks can be deinterlaced from 480i (NTSC) or 576i (PAL) to 480p (NTSC) or 576p (PAL). Set Component I/P to On in Manual Setup to activate this feature (see page 81).

•The analog video signals input at the COMPONENT VIDEO jacks and output at the S VIDEO or VIDEO jacks cannot be converted to 480p (NTSC) or 576p (PAL) /1080i/720p.

•The analog video signals output at the HDMI jack can be up-scaled to 480p/1080i/720p.

•When the analog video signals are input at the COMPONENT VIDEO, S VIDEO and VIDEO jacks, the priority order of the input signals is as follows where the analog video signals input at the COMPONENT VIDEO jacks have the top priority.

1.COMPONENT VIDEO

2.S VIDEO

3.VIDEO

22

Image 24

Yamaha RX-V2600 Video jacks, Video signal flow for MONITOR OUT, Hdmi Component Video S Video Video, VIDEO jacks

Contents

RX-V2600 AV Receiver Ampli-tuner audio-vidéoMANUAL DE INSTRUCCIONES GEBRUIKSAANWIJZING CAUTION READ THIS BEFORE OPERATING YOUR UNIT For U.K. customersSpecial Instructions for U.K. Model CONTENTS AUTO SETUPFM/AM TUNING CONTROLS AND FUNCTIONSFEATURES Built-in 7-channel power amplifierSound field features Other featuresSupplied accessories GETTING STARTEDInstalling batteries in the remote controls Installing batteriesZone 2/Zone 3 remote control 1 Press the part and slide the battery compartment cover offHandling the remote control Opening and closing the front panel door7 PRESET/TUNING l / h CONTROLS AND FUNCTIONS3 4 5 6 7 8 9 0 A B C D E 1 MASTER ON/OFF9 PRESET/TUNING EDIT B TUNING MODE AUTO/MAN’L, DISPLAYD Remote control sensor N VOLUMERemote control C POWER H VOLUME +S Radio Data System tuning buttons U.K. and Europe models only B STANDBYZone 2/Zone 3 remote control 2 PRESET +4 ID1/ID2 switch 5 POWER1 YPAO indicator A MEMORY indicator2 HDMI indicator 3 CINEMA DSP indicatorJ 96/24 indicator K LFE indicatorL Input channel and speaker indicators Input channel indicators Presence and surround back speaker indicatorsA HDMI IN/OUT connectors Rear panel1 DIGITAL OUTPUT jacks 2 DIGITAL INPUT jacksBefore connecting speakers CONNECTIONSFront speakers FR and FL Center speaker CConnecting speakers Connecting to the speaker terminalsDi-pole speaker layout FRONT terminals3 Loosen the knob using the supplied speaker terminal wrench 4 Insert one bare wire into the hole on the side of each terminalConnecting the banana plug 1 Open the tab 2 Insert one bare wire into the hole of each terminal3 Return the tab to secure the wire Speaker layoutPresence speakers SINGLE SBUsing bi-wire and bi-AMP connections Bi-wire connectionConventional connection Bi-AMP connectionInformation on cables and jacks used for connections Cable indicationsAnalog jacks Digital jacksAudio signal flow for OUT REC Audio jacksHDMI DIGITAL AUDIO COAXIAL DIGITAL AUDIO OPTICAL AUDIO AUDIO jacksVideo signal flow for MONITOR OUT Video jacksHDMI COMPONENT VIDEO S VIDEO VIDEO VIDEO jacksConnecting HDMI components HDMI out DVD PlayerCable TV or HDMI outConnecting video components Connecting a DVD playerVideo in Connecting other video components Connecting to the MULTI CH INPUT jacks Connecting to the VIDEO AUX jacks on the front panelConnecting audio components CD recorderMD recorder or tape deck CD playerConnecting an external amplifier 1 FRONT PRE OUT jacks2 SURROUND PRE OUT jacks 3 SUBWOOFER PRE OUT jackConnecting the antennas Connecting the AM loop antenna1 Set up the AM loop antenna 3 Orient the AM loop antenna for the bestConnecting the power cable Connecting the AC power cableAC OUTLETS SWITCHED Turning on and off this unitSetting the speaker impedance ADVANCED SETUP SP IMP.-8 MINpower of this unit modeAUTO SETUP Optimizer microphone setupWiring IntroductionUsing AUTO SETUP 1 Switch on this unit and video monitor3 Press k / n repeatedly to select Auto Setup and then press h 4 Press k / n repeatedly to select Setup Menu and then press h5 Press k / n repeatedly to select Wiring 6 For Wiring, Distance, Size or Level, select8 Press n to select Setup Type and then select Distance, Size, Equalizing or Level and then press hIf you set Setup Type to “Auto” If you set Setup Type to “Step”Confirming the results 9 Press n to select Start and then press ENTERPage 2 Turn on the power of the video monitor PLAYBACKBasic operations INPUTthe volume to the desired output level DialNorm+4dBMUSIC A Hall in Vienna L RAdjusting the tonal quality Using SILENT CINEMA1 Press MUTE on the remote control 2 Press MUTE again or press VOLUME +/- to resume the sound outputSelecting the MULTI CH INPUT Enjoying multi-channel software in 6.1/7.1 channel surroundAuto Decoders2 Press SELECT on the remote control to select a decoder Enjoying 2-channel software in surroundDecoder types for the Enhanced, MOVIE THEATER or THX program Decoder types for the Surround programUsing PURE DIRECT Using the night listening modesEffect.LvlMID 120min VOLUME Using the sleep timerListening to unprocessed input signals 2ch StereoVirtual CINEMA DSP Playing video sources in the backgroundSelecting audio input modes AUTO2 Press n repeatedly to select Signal Info. and then press h HDMI SignalHDMI Resolution Analog Resolution1 Turn on the power of this unit and all connected components RECORDINGNotes on the DTS software 4 Start recording on the recording componentFM/AM TUNING Automatic tuning3 Press TUNING MODE AUTO/MAN’L repeatedly so that the AUTO indicator lightsManual tuning Automatic preset tuning2 Press TUNING MODE AUTO/MAN’L repeatedly so that the AUTO indicator 3 Press PRESET/TUNING l / h to manually tune into the desired stationCustomized automatic preset tuning 1 Repeat steps 1 and 2 in “Automatic tuning”C8FM 87.50MHz StraightManual preset tuning C3AMSci-Fi Sci-FiSelecting preset stations 6 Repeat steps 1 to 5 to store other stationsC3AM Sci-FiExchanging preset stations 1,3 2,4E1FM 87.50MHz E1FMPS Program Service name mode Receiving Radio Data System stationsChanging the Radio Data System mode PTY Program Type mode3 Press PRESET k / n to select the desired program type PTY SEEK function2 Press PTY SEEK MODE to set this unit in the PTY SEEK mode POP MTo cancel this function 1 Check that the EON indicator is lit in the front panel displayEON function What is a sound field? Changing parameter settingsEDITING SOUND FIELD PARAMETERS Elements of a sound field5 Press EXIT on the remote control to exit 3 Press EXIT on the remote control to exitInitializing sound field programs 2 Press k / n repeatedly to select Stereo/Surround and then press hSOUND FIELD PROGRAM DESCRIPTIONS For movie/video sourcesPROGRAMS SOUND FIELDEnglish SOUND FIELD PROGRAM DESCRIPTIONSFor music sources MULTIInit. Delay Initial delay SOUND FIELD PARAMETER DESCRIPTIONSDSP Level DSP level Room Size Room sizeSur. Init. Delay Surround initial delay SB. Init. Delay Surround back initial delayLiveness Liveness Sur. Room Size Surround room sizeRev. Delay Reverberation delay Rev. Time Reverberation timeRev. Level Reverberation level Large value = 5.0 sDimension Dimension Dialogue Lift Dialog liftFor 2ch Stereo For 7ch StereoDecode Type Decoder type For MOVIE THEATER For THX CinemaFor SURROUND Standard For SURROUND EnhancedSOUND FIELD PROGRAM SPEAKER LAYOUTS Front left speakerPresence left speaker Surround right speaker2-channel audio 5.1/6.1-channel5.1/6.1-channel monaural2-channel audio 2-channel audio5.1/6.1-channel 5.1/6.1-channelWhen PR/SB Priority When PR/SB Priority2-channel audio monauralManual Setup Manual setup menu SYSTEM OPTIONSStereo/Surround Stereo/Surround menu Input Select Input select menuAuto Setup Auto setup menu Signal Info. Signal information menuSystem Memory System memory menu Language GUI language menu3 Press k / n repeatedly to select the parameter you want to adjust 5 Press EXITChanging parameter settings Memory back-upVolume Trim Volume trimming Input Select2 Select Input Select and then press h 5 Press l / h to select OK and press ENTER when complete Rename RenameI/O Assignment Input/output assignment 3 Press ENTER to select a character type CAPITAL/SMALL/FIGURE/MARKAudio Select Audio selection Decoder Mode Decoder modeMulti CH Assign Multi channel assignment Input Channels Input channelsManual Setup Sound 3 Press k / n on the remote control to select Sound and then press h4 Select the desired parameters and then press h to access and adjust LFE Level Low-frequency effect level1 Press k / n to select Test Tone or the speaker you want to adjust 2 Press h to access the settings window4 Press n to select EDIT and press ENTER to access the edit window Dynamic Range Dynamic range6 Select EXIT and press ENTER to exit the settings window Tone Control Tone controlAudio Option Audio options 5 Repeat steps 3 and 4 until you are satisfied with the resultsAudio Delay Audio delay Initial Volume Initial volumeMax Volume Maximum volume PR/SB Priority Presence/surround back speaker priorityManual Setup Video Speaker settings3 Press k / n on the remote control to select Video and then press h Channel Mute Channel muteConversion Video conversion Component I/P Component interlace progressiveHDMI Up-Scaling HDMI up-scaling HDMI Aspect HDMI aspect ratio Short Message Short messagePosition Position Wall Paper Wall paperManual Setup Basic 3 Press k / n on the remote control to select Basic and then press hTest Tone Test tone Speaker Set Speaker setFront Front speakers Center Center speakerSurround Surround left/right speakers Surround Back Surround back left/right speakersSWFR Phase Subwoofer Phase Speaker Distance Speaker distancePresence Presence speakers Bass Out Bass outSpeaker Level Speaker level Speaker distancesUnit Unit Manual Setup Option THX Set THX settings3 Press k / n on the remote control to select Option and then press h SB Speaker Dist. Surround back speaker distanceDimmer Dimmer Multi Zone Multi zoneSpeaker B Speaker B Zone2 Amplifier Zone 2 amplifier Zone3 Amplifier Zone 3 amplifierZone2 Volume Zone 2 volume Zone3 Volume Zone 3 volumeZone2 OSD Zone 2 on-screen display Sur.Initialize Surround initialize Memory Guard Memory GuardSound field program groups cannot be initialized when Memory Guard is set to “On” see page Audio Select Audio selectionHDMI Set HDMI settings To save settings5 Press ENTER to save settings System MemoryTo load settings 5 Press ENTER to load settingsLanguage 3 Select Load and then press ENTERADVANCED SETUP Using ADVANCED SETUPUser preset PRESET Speaker impedance SP IMPWake on RS-232C access WAKE ON 232C Remote control AMP ID REMOTE AMPRemote control tuner ID REMOTE TUN Video reset V-RESETREMOTE CONTROL FEATURES Control areaControlling this unit Controlling other componentsControlling each component 9 llSetting remote control codes Remote control code default settings1 Set AMP/SOURCE/TV to SOURCE Setting remote control AMP codes Setting remote control tuner codes8 Press LEARN again to exit from the setup mode 5 Press ENTERUsing LEARN 2 Press an input selector button to select a source component1 Set AMP/SOURCE/TV to SOURCE 5 to 10 cm4 Press LEARN using a ballpoint pen or similar object 5 Press the button for which you want to program the new function7 Press LEARN again to exit the learning mode Using RE-NAME 3 Press RE-NAME using a ballpoint pen or similar object1 Set AMP/SOURCE/TV to AMP or SOURCE 4 Press k / n to select and enter a characterUsing MACRO CD areaCD area *4 MD/TAPE area *42 Press MACRO using a ballpoint pen or similar object MACRO operationsProgramming MACRO operations 1 Set MACRO ON/OFF to ON 2 Press a macro buttonUsing CLEAR 2 Press CLEAR by using a ballpoint pen or similar objectBasic CLEAR operations 3 Press k / n to select the clear mode3 Press LEARN using a ballpoint pen or similar object Clearing a learned function5 Release the object used to press CLEAR to exit the clearing mode 6 Press LEARN again to exitClearing a macro function 4 Press CLEAR to exit the clearing mode5 Press MACRO again to exit 2 Press MACRO using a ballpoint pen or similar objectConnecting the Zone 2 and Zone 3 components Using the external amplifiersZONE 2/ZONE Using the internal amplifiers of this unit IMPORTANT SAFETY NOTICESelecting Zone 2 or Zone Front panel operationsRemote control operations 1 Set AMP/SOURCE/TV on the remote control to AMPControlling Zone 2 and Zone Selecting the input source of Zone 2 or ZoneUsing the control mode of Zone 2 and Zone Adjusting the volume level of Zone 2 or ZoneAdjusting the tonal quality of Zone 2 or Zone Displaying the Zone 2 on-screen displayWhat is HDMI? HDMIHDMI compatibility with this unit Setting the HDMI parameters Converting analog video signals to HDMISetting the HDMI support audio Basic HDMI operationsTROUBLESHOOTING GeneralProblem CauseProblem TROUBLESHOOTINGINFORMATION ADDITIONALProblem CauseRemedy Tuner ProblemINFORMATION ADDITIONALRemote control Problem“LIST OF REMOTE CONTROL CODES” at the end CauseAUTO SETUP Before AUTO SETUPDuring AUTO SETUP Error messageAfter AUTO SETUP HDMIError message Warning messageGLOSSARY Audio informationASA Advanced Speaker Array Dolby DigitalLFE 0.1 channel Neo6PCM Linear PCM Sampling frequency and number of quantized bitsTHX Games Mode THX Music ModeTHX Select2 THX Select2 Cinema modeComponent video signal Composite video signalS-video signal Video informationParametric equalizer information FrequencyGain Q factorSPECIFICATIONS AUDIO SECTIONVIDEO SECTION FM SECTIONGENERAL Specifications are subject to change without noticeLIST OF REMOTE CONTROL CODES LISTE DES CODES DE COMMANDE LISTE DER FERNBEDIENUNGSCODES LISTA ÖVER FJÄRRKONTROLLKODERLISTA DEI CODICI DI TELECOMANDO LISTA DE CÓDIGOS DE MANDO A DISTANCIA LIJST MET AFSTANDSBEDIENINGSCODESDVD RECORDER LD PLAYERTAPE DECK MD RECORDERBEKO Page MANESTH Printed in Malaysia WG000202005 All rights reserved