Sets this unit, Zone 2 and Zone 3 to the standby mode (see page 30).
Note
This button is operational only when MASTER ON/OFF on the front panel is pressed inward to the ON position.
Turns on this unit, Zone 2 and Zone 3 (see page 30).
Note
This button is operational only when MASTER ON/OFF on the front panel is pressed inward to the ON position.
Toggles the priority for the type of audio input jack between AUTO, HDMI, COAX/OPT and ANALOG when one component is connected to two or more input jacks on the rear panel (see page 44).
Sets the sleep timer.
Selects MULTI CH INPUT when using an external decoder, etc.
Selects another input source that you can control independently of the input source selected with the input selector buttons.
Increases or decreases the volume level.
Selects the component you want to control with the remote control.
AMP
Set to this position to operate this unit.
Set to this position to operate the component selected with an input selector button.
TV
Set to this position to operate the television assigned to either DTV or PHONO.
Note
If televisions are assigned to both DTV and PHONO, the one assigned to DTV takes priority and gets operated when AMP/ SOURCE/TV is set to TV.
y
To set the remote control codes for other components, see page 98.
CONTROLS AND FUNCTIONS
Mutes the sound. Press again to restore the audio output to the previous volume level.
Turns on or off the PURE DIRECT mode (see page 42).
Exits the GUI mode.
Turns on or off the night listening modes (see page 42).
Switches the sound field programs off or on. When STRAIGHT is selected,
Turns on or off the set of front speakers connected to the SPEAKERS A and/or B terminals on the rear panel each time the corresponding button is pressed.
Changes the name of the input source in the display window (see page 102).
Clears remote control codes or functions acquired from the learn, macro and rename features (see page 105).
Programs remote control codes or functions from other remote controls (see page 100).
These buttons are operational only when TUNER is selected as the input source.
Switches the Radio Data System display between the PS mode, PTY mode, RT mode, CT mode (if the station offers the corresponding data services) and the frequency display (see page 53).
Sets this unit to the PTY SEEK mode (see page 54).
Starts searching for a station after the desired program type has been selected in the PTY SEEK mode
(see page 54).
EON
Selects a radio program type (NEWS, INFO, AFFAIRS, SPORTS) tune in automatically (see page 55).
INTRODUCTION
English
9