TROUBLESHOOTING
Problem | Cause | Remedy | See | |
page | ||||
|
|
| ||
|
|
|
| |
The sound suddenly | The protection circuitry has been activated | Check that the impedance selector setting is correct. | 31 | |
goes off. | because of a short circuit, etc. |
|
| |
Check the speaker wires are not touching each other | — | |||
|
| |||
|
| and then turn this unit back on. | ||
|
|
| ||
|
|
|
| |
| The sleep timer has turned the unit off. | Turn on the power, and play the source again. | — | |
|
|
|
| |
| The sound is muted. | Press MUTE to cancel a mute. | 39 | |
|
|
|
| |
Only the speaker on | Incorrect cable connections. | Connect the cables properly. If the problem persists, | 20 | |
one side can be |
| the cables may be defective. | ||
|
| |||
heard. |
|
|
| |
Incorrect balance settings in the GUI | Adjust the Speaker Level settings. | 86 | ||
| ||||
| menu. |
| ||
|
|
| ||
|
|
|
| |
Only the center | When playing a monaural source with a |
|
| |
speaker outputs | CINEMA DSP program, the source signal |
|
| |
substantial sound. | is directed to the center channel, and the |
|
| |
| front and surround speakers output effect |
|
| |
| sounds. |
|
| |
|
|
|
| |
No sound from the | The sound field programs are turned off. | Press STRAIGHT (EFFECT) to turn them on. | 43 | |
effect speakers |
|
|
| |
You are using a source or program | Try another sound field program. |
| ||
|
| |||
| combination that does not output sound |
| 37 | |
| from all channels. |
|
| |
|
|
|
| |
No sound from the | The output level of the center speaker is | Raise the level of the center speaker. | 86 | |
center speaker | set to minimum. |
| ||
|
| |||
|
|
|
| |
| Center is set to None in Speaker Set. | Select the appropriate setting for the center speaker. | 83 | |
|
|
|
| |
| One of the HiFi DSP programs (except for | Try another sound field program. | 37 | |
| 7ch Stereo) has been selected. |
| ||
|
|
| ||
|
|
|
| |
No sound from the | The output level of the surround speakers | Raise the output level of the surround speakers. | 86 | |
surround speakers | is set to minimum. |
| ||
|
| |||
|
|
|
| |
| Surround is set to None in Speaker Set. | Select the appropriate setting for the surround left and | 83 | |
|
| right speakers. | ||
|
|
| ||
|
|
|
| |
| A monaural or stereo source is being | Press STRAIGHT (EFFECT) to turn on the sound | — | |
| played with STRAIGHT. | fields. | ||
|
| |||
|
|
|
| |
No sound from the | Presence speakers are selected. | Select Surround Back in PR/SB Priority. | 79 | |
surround back |
|
|
| |
Surround is set to None in Speaker Set. | If the surround left and right speakers are set to None, |
| ||
speakers |
| |||
|
| surround back speakers are automatically set to None. | 83 | |
|
| Select the appropriate setting for the surround left and | ||
|
|
| ||
|
| right speakers. |
| |
|
|
|
| |
| Surround Back is set to None in Speaker | Select Small x1, Small x2, Large x1 or Large x2. | 83 | |
| Set. |
| ||
|
|
| ||
|
|
|
| |
No sound from the | Bass Out is set to Front when a Dolby | Select SWFR or Both. | 85 | |
subwoofer | Digital or DTS signal is being played. |
| ||
|
| |||
|
|
|
| |
| Bass Out is set to SWFR or Front when a | Select Both. | 85 | |
|
| |||
|
|
| ||
|
|
|
| |
| The source does not contain low bass |
|
| |
| signals. |
|
| |
|
|
|
|
INFORMATION | ADDITIONAL |
|
|
|
|
English |
|
|
|
115
