You can assign an HDMI component to the HDMI IN 1 or HDMI IN 2 jack on the rear panel of this unit so that the audio and video signals input via HDMI connection can be simultaneously played back.
Use the I/O Assignment parameter in Input Select to assign HDMI components (see page 74).
HDMI
This unit is equipped with the HDMI
Use the HDMI
Note
When the analog video signals with 1080i or 720p of resolution are
You can choose to play back HDMI audio signals on this unit or on another HDMI component connected to the HDMI OUT jack on the rear panel of this unit.
Use the HDMI Set parameter in the Option menu to set the HDMI support audio (see page 92).
HDMI
Perform the following steps to listen to playback from an registered HDMI component.
Note
If an error message appears in the front panel display,
see page 120 for a complete list of error messages and proper remedies.
1Rotate the INPUT selector on the front panel (or press one of the input selector buttons on the remote control) to select the input source assigned to the HDMI IN 1 or HDMI IN 2 jack on the rear panel of this unit.
INPUT | A | B | AUDIO SEL | SLEEP |
|
|
|
| |
| PHONO | TUNER | CD | MULTI CH IN |
| or |
|
|
|
| CBL/SAT | MD/TAPE | ||
| DTV | VCR 1 | DVR/VCR2 | DVD |
Front panel | Remote control |
2Press AUDIO SELECT on the front panel or AUDIO SEL on the remote control repeatedly to select AUTO or HDMI as the input mode.
The following front panel displays are examples where DVD is selected as the input source.
AUDIO SELECTAUDIO SEL
Front panel | Remote control |
VCR 1 CBL/SAT DTV | DVD MD/TAPE | |||
| INPUT: | DVD | VOLUME | dB |
SP |
|
|
| |
A.SEL: | AUTO |
|
| |
A | L | R | ||
|
|
|
| |
| or |
|
| |
|
|
| ||
VCR 1 CBL/SAT DTV | DVD MD/TAPE | |||
| INPUT: | DVD | VOLUME | dB |
SP |
|
|
| |
A.SEL: | HDMI |
|
| |
A | L | R | ||
|
|
|
|
|
OPERATION | ADVANCED |
English
113