Manuals / Yamaha / Home Audio / Stereo System

Yamaha RX-V2600 Decode Type Decoder type For MOVIE THEATER, For THX Cinema, For SURROUND Standard

Models: RX-V2600

1 135

Download 135 pages 8 Kb

Page 67

SOUND FIELD PARAMETER DESCRIPTIONS

■Decode Type (Decoder type)

For MOVIE THEATER

Function:	Selects the decoder used to playback 2-channel sources using MOVIE THEATER programs.
Choices:	Pro Logic / Pro Logic x / Neo:6

For THX Cinema

Function:	Selects the decoder used to playback 2-channel sources using THX Cinema.
Choices:	Pro Logic / Pro Logic x / Neo:6

For SURROUND Standard

Function:	Selects the decoder used to playback 2-channel sources using SURROUND Standard.
Choices:	Pro Logic / PL x Movie / PL x Music / PL x Game / Neo:6 Cinema / Neo:6 Music

For SURROUND Enhanced

Function:		Selects the decoder used to playback 2-channel sources using SURROUND Enhanced.
Choices:		Pro Logic / Pro Logic x / Neo:6

Note

Pro Logic x appears when the surround back speakers are available.

■Initialize (Initialize)

Function:	Initializes each sound field program individually.
Choices:	No, Yes

Note

If you want to initialize all sound field programs, use the Sur.Initialize parameter in the Option menu (see page 91).

PROGRAMS	SOUND FIELD

English

65

Image 67

Yamaha RX-V2600 Decode Type Decoder type For MOVIE THEATER, For THX Cinema, For SURROUND Standard, For SURROUND Enhanced

Contents

AV Receiver Ampli-tuner audio-vidéo RX-V2600MANUAL DE INSTRUCCIONES GEBRUIKSAANWIJZING For U.K. customers CAUTION READ THIS BEFORE OPERATING YOUR UNITSpecial Instructions for U.K. Model CONTROLS AND FUNCTIONS CONTENTSAUTO SETUP FM/AM TUNINGOther features FEATURESBuilt-in 7-channel power amplifier Sound field featuresGETTING STARTED Supplied accessories1 Press the part and slide the battery compartment cover off Installing batteries in the remote controlsInstalling batteries Zone 2/Zone 3 remote controlOpening and closing the front panel door Handling the remote control1 MASTER ON/OFF 7 PRESET/TUNING l / hCONTROLS AND FUNCTIONS 3 4 5 6 7 8 9 0 A B C D EN VOLUME 9 PRESET/TUNING EDITB TUNING MODE AUTO/MAN’L, DISPLAY D Remote control sensorRemote control B STANDBY C POWERH VOLUME + S Radio Data System tuning buttons U.K. and Europe models only5 POWER Zone 2/Zone 3 remote control2 PRESET + 4 ID1/ID2 switch3 CINEMA DSP indicator 1 YPAO indicatorA MEMORY indicator 2 HDMI indicatorPresence and surround back speaker indicators J 96/24 indicatorK LFE indicator L Input channel and speaker indicators Input channel indicators2 DIGITAL INPUT jacks A HDMI IN/OUT connectorsRear panel 1 DIGITAL OUTPUT jacksCenter speaker C Before connecting speakersCONNECTIONS Front speakers FR and FLFRONT terminals Connecting speakersConnecting to the speaker terminals Di-pole speaker layout4 Insert one bare wire into the hole on the side of each terminal 3 Loosen the knob using the supplied speaker terminal wrenchSpeaker layout Connecting the banana plug1 Open the tab 2 Insert one bare wire into the hole of each terminal 3 Return the tab to secure the wireSINGLE SB Presence speakersBi-AMP connection Using bi-wire and bi-AMP connectionsBi-wire connection Conventional connectionDigital jacks Information on cables and jacks used for connectionsCable indications Analog jacksAUDIO jacks Audio signal flow for OUT RECAudio jacks HDMI DIGITAL AUDIO COAXIAL DIGITAL AUDIO OPTICAL AUDIOVIDEO jacks Video signal flow for MONITOR OUTVideo jacks HDMI COMPONENT VIDEO S VIDEO VIDEOHDMI out Connecting HDMI componentsHDMI out DVD Player Cable TV orConnecting a DVD player Connecting video componentsVideo in Connecting other video components Connecting to the VIDEO AUX jacks on the front panel Connecting to the MULTI CH INPUT jacksCD player Connecting audio componentsCD recorder MD recorder or tape deck3 SUBWOOFER PRE OUT jack Connecting an external amplifier1 FRONT PRE OUT jacks 2 SURROUND PRE OUT jacks3 Orient the AM loop antenna for the best Connecting the antennasConnecting the AM loop antenna 1 Set up the AM loop antennaTurning on and off this unit Connecting the power cableConnecting the AC power cable AC OUTLETS SWITCHEDmode Setting the speaker impedanceADVANCED SETUP SP IMP.-8 MIN power of this unitIntroduction AUTO SETUPOptimizer microphone setup Wiring4 Press k / n repeatedly to select Setup Menu and then press h Using AUTO SETUP1 Switch on this unit and video monitor 3 Press k / n repeatedly to select Auto Setup and then press hDistance, Size, Equalizing or Level and then press h 5 Press k / n repeatedly to select Wiring6 For Wiring, Distance, Size or Level, select 8 Press n to select Setup Type and then select9 Press n to select Start and then press ENTER If you set Setup Type to “Auto”If you set Setup Type to “Step” Confirming the resultsPage INPUT 2 Turn on the power of the video monitorPLAYBACK Basic operationsA Hall in Vienna L R the volume to the desired output levelDialNorm+4dB MUSIC2 Press MUTE again or press VOLUME +/- to resume the sound output Adjusting the tonal qualityUsing SILENT CINEMA 1 Press MUTE on the remote controlDecoders Selecting the MULTI CH INPUTEnjoying multi-channel software in 6.1/7.1 channel surround AutoDecoder types for the Surround program 2 Press SELECT on the remote control to select a decoderEnjoying 2-channel software in surround Decoder types for the Enhanced, MOVIE THEATER or THX programUsing the night listening modes Using PURE DIRECTEffect.LvlMID 2ch Stereo 120min VOLUMEUsing the sleep timer Listening to unprocessed input signalsAUTO Virtual CINEMA DSPPlaying video sources in the background Selecting audio input modesAnalog Resolution 2 Press n repeatedly to select Signal Info. and then press hHDMI Signal HDMI Resolution4 Start recording on the recording component 1 Turn on the power of this unit and all connected componentsRECORDING Notes on the DTS softwarerepeatedly so that the AUTO indicator lights FM/AM TUNINGAutomatic tuning 3 Press TUNING MODE AUTO/MAN’L3 Press PRESET/TUNING l / h to manually tune into the desired station Manual tuningAutomatic preset tuning 2 Press TUNING MODE AUTO/MAN’L repeatedly so that the AUTO indicatorStraight Customized automatic preset tuning1 Repeat steps 1 and 2 in “Automatic tuning” C8FM 87.50MHzSci-Fi Manual preset tuningC3AM Sci-FiSci-Fi Selecting preset stations6 Repeat steps 1 to 5 to store other stations C3AME1FM Exchanging preset stations1,3 2,4 E1FM 87.50MHzPTY Program Type mode PS Program Service name modeReceiving Radio Data System stations Changing the Radio Data System modePOP M 3 Press PRESET k / n to select the desired program typePTY SEEK function 2 Press PTY SEEK MODE to set this unit in the PTY SEEK mode1 Check that the EON indicator is lit in the front panel display To cancel this functionEON function Elements of a sound field What is a sound field?Changing parameter settings EDITING SOUND FIELD PARAMETERS2 Press k / n repeatedly to select Stereo/Surround and then press h 5 Press EXIT on the remote control to exit3 Press EXIT on the remote control to exit Initializing sound field programsFor movie/video sources SOUND FIELD PROGRAM DESCRIPTIONSSOUND FIELD PROGRAM DESCRIPTIONS PROGRAMSSOUND FIELD EnglishMULTI For music sourcesRoom Size Room size Init. Delay Initial delaySOUND FIELD PARAMETER DESCRIPTIONS DSP Level DSP levelSur. Room Size Surround room size Sur. Init. Delay Surround initial delaySB. Init. Delay Surround back initial delay Liveness LivenessLarge value = 5.0 s Rev. Delay Reverberation delayRev. Time Reverberation time Rev. Level Reverberation levelFor 7ch Stereo Dimension DimensionDialogue Lift Dialog lift For 2ch StereoFor SURROUND Enhanced Decode Type Decoder type For MOVIE THEATERFor THX Cinema For SURROUND StandardSurround right speaker SOUND FIELD PROGRAM SPEAKER LAYOUTSFront left speaker Presence left speakermonaural 2-channel audio5.1/6.1-channel 5.1/6.1-channel5.1/6.1-channel 2-channel audio2-channel audio 5.1/6.1-channelmonaural When PR/SB PriorityWhen PR/SB Priority 2-channel audioInput Select Input select menu Manual Setup Manual setup menuSYSTEM OPTIONS Stereo/Surround Stereo/Surround menuLanguage GUI language menu Auto Setup Auto setup menuSignal Info. Signal information menu System Memory System memory menuMemory back-up 3 Press k / n repeatedly to select the parameter you want to adjust5 Press EXIT Changing parameter settingsInput Select Volume Trim Volume trimming2 Select Input Select and then press h 3 Press ENTER to select a character type CAPITAL/SMALL/FIGURE/MARK 5 Press l / h to select OK and press ENTER when completeRename Rename I/O Assignment Input/output assignmentInput Channels Input channels Audio Select Audio selectionDecoder Mode Decoder mode Multi CH Assign Multi channel assignmentLFE Level Low-frequency effect level Manual Setup Sound3 Press k / n on the remote control to select Sound and then press h 4 Select the desired parameters and then press h to access and adjustDynamic Range Dynamic range 1 Press k / n to select Test Tone or the speaker you want to adjust2 Press h to access the settings window 4 Press n to select EDIT and press ENTER to access the edit window5 Repeat steps 3 and 4 until you are satisfied with the results 6 Select EXIT and press ENTER to exit the settings windowTone Control Tone control Audio Option Audio optionsPR/SB Priority Presence/surround back speaker priority Audio Delay Audio delayInitial Volume Initial volume Max Volume Maximum volumeChannel Mute Channel mute Manual Setup VideoSpeaker settings 3 Press k / n on the remote control to select Video and then press hComponent I/P Component interlace progressive Conversion Video conversionHDMI Up-Scaling HDMI up-scaling Wall Paper Wall paper HDMI Aspect HDMI aspect ratioShort Message Short message Position PositionSpeaker Set Speaker set Manual Setup Basic3 Press k / n on the remote control to select Basic and then press h Test Tone Test toneSurround Back Surround back left/right speakers Front Front speakersCenter Center speaker Surround Surround left/right speakersBass Out Bass out SWFR Phase Subwoofer PhaseSpeaker Distance Speaker distance Presence Presence speakersSpeaker distances Speaker Level Speaker levelUnit Unit SB Speaker Dist. Surround back speaker distance Manual Setup OptionTHX Set THX settings 3 Press k / n on the remote control to select Option and then press hMulti Zone Multi zone Dimmer DimmerSpeaker B Speaker B Zone3 Amplifier Zone 3 amplifier Zone2 Amplifier Zone 2 amplifierZone3 Volume Zone 3 volume Zone2 Volume Zone 2 volumeZone2 OSD Zone 2 on-screen display Audio Select Audio selection Sur.Initialize Surround initializeMemory Guard Memory Guard Sound field program groups cannot be initialized when Memory Guard is set to “On” see pageSystem Memory HDMI Set HDMI settingsTo save settings 5 Press ENTER to save settings3 Select Load and then press ENTER To load settings5 Press ENTER to load settings LanguageSpeaker impedance SP IMP ADVANCED SETUPUsing ADVANCED SETUP User preset PRESETVideo reset V-RESET Wake on RS-232C access WAKE ON 232CRemote control AMP ID REMOTE AMP Remote control tuner ID REMOTE TUNControlling other components REMOTE CONTROL FEATURESControl area Controlling this unit9 ll Controlling each componentRemote control code default settings Setting remote control codes1 Set AMP/SOURCE/TV to SOURCE 5 Press ENTER Setting remote control AMP codesSetting remote control tuner codes 8 Press LEARN again to exit from the setup mode5 to 10 cm Using LEARN2 Press an input selector button to select a source component 1 Set AMP/SOURCE/TV to SOURCE5 Press the button for which you want to program the new function 4 Press LEARN using a ballpoint pen or similar object7 Press LEARN again to exit the learning mode 4 Press k / n to select and enter a character Using RE-NAME3 Press RE-NAME using a ballpoint pen or similar object 1 Set AMP/SOURCE/TV to AMP or SOURCEMD/TAPE area *4 Using MACROCD area CD area *41 Set MACRO ON/OFF to ON 2 Press a macro button 2 Press MACRO using a ballpoint pen or similar objectMACRO operations Programming MACRO operations3 Press k / n to select the clear mode Using CLEAR2 Press CLEAR by using a ballpoint pen or similar object Basic CLEAR operations6 Press LEARN again to exit 3 Press LEARN using a ballpoint pen or similar objectClearing a learned function 5 Release the object used to press CLEAR to exit the clearing mode2 Press MACRO using a ballpoint pen or similar object Clearing a macro function4 Press CLEAR to exit the clearing mode 5 Press MACRO again to exitUsing the external amplifiers Connecting the Zone 2 and Zone 3 componentsZONE 2/ZONE Front panel operations Using the internal amplifiers of this unitIMPORTANT SAFETY NOTICE Selecting Zone 2 or ZoneSelecting the input source of Zone 2 or Zone Remote control operations1 Set AMP/SOURCE/TV on the remote control to AMP Controlling Zone 2 and ZoneDisplaying the Zone 2 on-screen display Using the control mode of Zone 2 and ZoneAdjusting the volume level of Zone 2 or Zone Adjusting the tonal quality of Zone 2 or ZoneHDMI What is HDMI?HDMI compatibility with this unit Basic HDMI operations Setting the HDMI parametersConverting analog video signals to HDMI Setting the HDMI support audioCause TROUBLESHOOTINGGeneral ProblemADDITIONAL ProblemTROUBLESHOOTING INFORMATIONCause ProblemRemedy ADDITIONAL TunerProblem INFORMATIONCause Remote controlProblem “LIST OF REMOTE CONTROL CODES” at the endError message AUTO SETUPBefore AUTO SETUP During AUTO SETUPWarning message After AUTO SETUPHDMI Error messageDolby Digital GLOSSARYAudio information ASA Advanced Speaker ArraySampling frequency and number of quantized bits LFE 0.1 channelNeo6 PCM Linear PCMTHX Select2 Cinema mode THX Games ModeTHX Music Mode THX Select2Video information Component video signalComposite video signal S-video signalQ factor Parametric equalizer informationFrequency GainFM SECTION SPECIFICATIONSAUDIO SECTION VIDEO SECTIONSpecifications are subject to change without notice GENERALLIJST MET AFSTANDSBEDIENINGSCODES LIST OF REMOTE CONTROL CODES LISTE DES CODES DE COMMANDELISTE DER FERNBEDIENUNGSCODES LISTA ÖVER FJÄRRKONTROLLKODER LISTA DEI CODICI DI TELECOMANDO LISTA DE CÓDIGOS DE MANDO A DISTANCIAMD RECORDER DVD RECORDERLD PLAYER TAPE DECKBEKO Page MANESTH WG00020 Printed in Malaysia2005 All rights reserved