REMOTE CONTROL FEATURES
Macro buttons
POWER | POWER | STANDBY | POWER |
|
|
|
TV | AV |
| FREQ/TEXT | EON | MODE | PTY SEEK START |
A | B | AUDIO SEL | SLEEP |
|
|
|
|
|
| REC |
|
|
|
PHONO | TUNER | CD | DISC SKIP |
|
|
|
MULTI CH IN |
|
|
| |||
|
|
| OFF ON | MACRO | LEARN | CLEAR |
CBL/SAT | MD/TAPE |
|
|
| ||
DTV | VCR 1 | DVR/VCR2 | DVD |
|
|
|
MACRO ON/OFF MACRO
2Press a macro button.
Notes
•When you have finished using the MACRO feature, set MACRO ON/OFF to OFF.
•While the remote is carrying out a MACRO program, it will not accept any other button’s function until the macro operation is complete (the transmission indicator stops flashing).
•Continue to aim the remote control at the component the macro is operating until the macro operation is complete.
You can program your own macro and use the MACRO feature to transmit several remote control commands in sequence at the press of a button. Be sure to set up remote control codes or perform learning operations before programming the macro. We do not recommend programming continuous operations such as volume control in a macro.
Notes
•The default macro is not cleared when a new macro is programmed for a button. The default macro can be used again when the programmed macro is cleared.
•It is not possible to add a new signal (macro step) to the default macro. Programming a macro changes all macro contents.
1Set AMP/SOURCE/TV to AMP or SOURCE.
AMP
SOURCE
TV
“MCR ?” appears in the display window.
MACRO
Note
If you do not complete each of the following steps within 30 seconds, the macro programming mode will be automatically canceled. In this case, press MACRO again.
The macro button name (ex. M;DVD) and the selected component name (ex. DVD) appear alternately in the display window.
A | B | AUDIO SEL | SLEEP |
PHONO | TUNER | CD | MULTI CH IN |
CBL/SAT | MD/TAPE | ||
DTV | VCR 1 | DVR/VCR2 | DVD |
Note
AGAIN appears in the display window if you press a button other than a macro button.
104