Adjustment Procedure for Dolby Surround
Make the adjustments described below in order to reproduce Dolby Digital and DTS sound with greater accuracy.
Adjustment procedure
1 | Speaker Setup (page 48) |
(Turning the speakers to be used on and off and | |
| setting their response) |
| B |
2 | Adjusting the speaker levels (page 49) |
(Adjusting the signal output level to the various |
speakers)
B
3 | Mixing bass sound to the rear channel (page | |
48) | ||
| (Achieving smooth sound in the rear seat by mixing | |
| the front audio signals with the rear speaker signals) | |
| B | |
4 | Adjusting the acoustic image (page 48) | |
(Adjusting the acoustic image to achieve a sound as | ||
| ||
| if the center speaker were directly in front of the | |
| listener) | |
| B | |
5 | Achieving powerful high volume sound (page | |
49) | ||
| (Achieving energetic sound with even greater power, | |
| like the sound in a movie theater) | |
| B | |
6 | Adjusting the DVD Level (page 49) | |
(Adjust the volume (signal level) in the Dolby Digital, | ||
| Pro Logic II, DTS and PCM modes.) | |
| B | |
7 | Storing Settings in the Memory (page 49) | |
(Storing all the settings and adjustments made on the |
In case of combining the Automatic adjustments etc.
We recommend to make the Automatic adjustments before the Dolby Surround adjustments.
Setting the Speakers
1 Check that Defeat mode is off (page 22). 2 Touch [SYS.] on the main source screen.
The SYSTEM selection screen is displayed.
3 Touch
The
4 Touch [] of A.PROCESSOR.
The A.PROC list screen appears.
5 Touch [] of SPEAKER SELECT.
The SPEAKER SELECT screen appears.
6 Set the connected speaker by touching the respective [;] or [:] button.
FRONT1: OFF/FULL (Full Range)/TW (Tweeter)
FRONT2: OFF/ON
REAR: OFF/ON
CENTER: OFF/ON
SUBWOOFER: OFF/MONO/STEREO
7 Touch [RETURN] to return to the previous screen.
•Set the speaker which is not connected to OFF.
•Settings above can be carried out even when the speaker is set to OFF in “Speaker Setup” (page 48).
•To use the subwoofer in MONO with
Set MX Mode of the External Audio Processor
Before performing the operations below, set MX (Media Xpander) mode of the
1 Check that Defeat mode is off.
2 Touch [SYS.] on the main source screen.
The SYSTEM selection screen appears.
3 Touch
The
4 Select ON or OFF of MX by touching [;] or [:] of
MEDIA XPANDER.
OFF: Turns off the MX effect of every music source.
ON: Turns on the specified MX mode.
5 Touch [] after setting to ON.
The Media Xpander setup screen appears.