Display example for shortcut menu screen
The setup screen is displayed by touching one of these modes.
Display example for setup screen
1
3 2
1Close the Shortcut menu screen by touching [![1 Touch [10KEY] on the main source screen.](/images/new-backgrounds/28262/2826227xi2.webp){kind=small}
].
2The screen changes to the setup screen mode by touching another mode.
3Your desired setting can be made by using operation buttons.
Displaying the Numeric Keypad Input Screen
The numeric keypad input screen is displayed when the DVD mode is selected for searching a title or chapter, and for entering a country code or password for the DVD setup item, and also when selecting a channel number in the XM Radio mode.
1 Touch [10KEY] on the main source screen.
2 Touch the desired numeric key.
Display example for numeric keypad
1
2
3
4
5
8 
![3 Touch [ENT] to confirm your entry.](/images/new-backgrounds/28262/2826227xi4.webp){kind=small}
![1 Touch [V.SEL] on the main source screen.](/images/new-backgrounds/28262/2826227xi6.webp){kind=small}
6
7
1Operation buttons of this area can be used while displaying the numeric keypad input screen.
2Input screen area
3All input numbers will be deleted
4Previous number will be deleted
5Input number is confirmed
6Closes numeric keypad input screen
7Numeric keypad
8Operation buttons of this area cannot be used while displaying the numeric keypad input screen.
3 Touch [ENT] to confirm your entry.
Dual-Screen Display
The connected AMP
1 Touch [V.SEL] on the main source screen.
The VISUAL selection screen appears.
2 Touch [DUAL SCREEN].
The main source screen is restored showing the dual- screen display.
Display example for the
Changes the AMP display for the connected amplifier.
3 Touch [V.SEL] to cancel the dual-screen display.
The VISUAL selection screen appears.
4 Touch [NORMAL].
12-EN
The normal screen will be restored.
