![Recalling the Stored Contents of Amplifier](/images/new-backgrounds/28262/2826289x1.webp)
Recalling the Stored Contents of Amplifier
Adjustment
1Select
2Touch [READ].
Stored adjustment data will be recalled.
Titling the Amplifier
1 | From the AMPLIFIER LINK list screen, touch [ ] |
| of an amplifier to which a title is to be given. |
| The adjustment mode list screen appears. |
2 | Touch [ ] of NAME. |
| The title input screen appears. |
3 | Touch the desired character symbols. |
| You can use up to 8 characters. |
4 | After the input, touch [ENT] to confirm your entry. |
| As the entry is confirmed, the screen immediately before |
| the current one will be restored, and the title that has been |
| entered from the AMPLIFIER LINK list screen is shown. |
Displaying Status of External Amplifier
You can display the status of the connected external amplifier (MRD- M301 or
1 Touch [V.SEL] on the main source screen.
The VISUAL selection screen appears.
2 Touch [AMP STATUS].
The AMP status screen appears.
Display Example for AMP status screen
|
|
| 1 |
|
|
|
|
|
|
| ||
2 |
|
|
|
|
|
|
|
|
|
| 2 | |
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| |||||
|
| |||||||||||
|
|
|
|
|
|
|
| |||||
|
|
|
|
|
| 3 | ||||||
|
|
|
|
| ||||||||
|
|
|
|
|
|
|
| 4 | ||||
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
| 5 | |||||
|
|
|
|
|
1Amplifier Name
2Turns pages
3Temperature (°F)
4Voltage (V)
5Electric Currency
3 To cancel the AMP status screen, touch [V.SEL].
The VISUAL selection screen is displayed.
4 Touch [NORMAL].
The screen returns to the normal screen.
External Audio Processor
(Optional)
When an external audio processor is connected to this unit, you can operate it from this unit. Some audio processors may not be operated. When
Refer also to the operating instructions of the connected audio processor.
•The adjustments or settings performed on the connected audio processor cannot be operated properly from this unit.
To display the Audio processor mode screen:
To watch a video source, your vehicle must be parked with the ignition key in the ACC or ON position. To do this, follow the procedure below.
1.Bring your vehicle to a complete stop at a safe location. Engage the parking brake.
2.Keep pushing the foot brake and release the parking brake once then engage it again.
3.When the parking brake is engaged for the second time, release the foot brake.
•For automatic transmission vehicles, place the transmission lever in the Park position.
Now, the locking system for the Audio processor mode operation has been released. Engaging the parking brake can reactivate the Audio processor mode, as long as the car's ignition has not been turned off. It is not necessary to repeat the above procedure (1 through 3), of “To display the Audio processor mode screen.”
Each time the ignition is turned OFF, perform the procedure of “To display the Audio processor mode screen.”
Continued