HDD Player Operation
(Optional)
Listening to Music of HDD
This device is controllable from the unit when Alpine HDD player is connected.
1 Touch [SRC] on the main source screen. The source selection screen appears.
2 Touch [MM DRIVER].
The MM DRIVER mode main screen appears.
3 Select the desired music by touching [g] or
[f].
Searching: Touch [g] or [f].
4 Touch [:/J] to temporarily stop the music currently playing.
Touch [:/J] again to resume the play.
XM Radio (Optional)
Receiving XM Channels with the XM Receiver (Optional)
XM Satellite Radio* is the next generation of audio entertainment, with up to 100
An optional XM Satellite Radio Receiver
*XM and its corresponding logos are trademarks of XM Satellite Radio Inc.
•The controls on the
1 Touch [SRC] on the main source screen.
The source selection screen is displayed.
2 Touch [XM].
The XM main screen display appears.
3 Touch [BAND] to select XM1, XM2 or XM3.
4 Touch [NO./NAME] to select the channel number tuning.
Each time it is pressed, the tuning mode is changed. channel number tuning ↔ channel name tuning
5 Touch [; CH NO.] or [CH NO. :] to select the desired channel. Holding either button down will change channels continuously.
When selecting the channel name tuning in step 4, select a channel name by touching [; CH NAME] or [CH NAME :]. Holding either button down will change channel names continuously.
