Alpine IVA-D300 owner manual Playing DVD/Video CD, To display the DVD mode screen, 17-EN

Models: IVA-D300

1 78
Download 78 pages 3.24 Kb
Page 19
Image 19
DVD/Video CD

DVD/Video CD

Display example for DVD main screen

1 A

2 3 4

5

B

6

1[SRC] button: Refer to page 11

2 [

 

] button: Refer to pages 55 to 57

 

 

 

3[V.SEL] button: Displays the VISUAL selection screen

4[SYS.] button: Displays the SYSTEM selection screen

5

[

] button: Refer to page 11

6

[

] button: Refer to page 23

ADisplays the input title only for video CD.

BDisplays the title number/chapter number/elapsed playback time for a DVD.

Displays the track number/elapsed playback time for a video CD.

Some operations cannot be carried out depending on the disc or playback screen.

Displays of the function guide [P1/2], etc., may vary depending on the connected device(s).

Playing DVD/Video CD

IVA-D300 has a built-in DVD player. When an optional Alpine DVD/ video CD/CD player (or DVD changer) is connected to the IVA- D300, you can control it from the IVA-D300. (except some operations)

Playing DVD/Video CD WARNING

It is dangerous (and illegal in many states) for the driver to watch the DVD/TV/Video while driving the vehicle. The driver may be distracted from looking ahead and an accident could occur.

Install the IVA-D300 correctly so that the driver cannot watch DVD/TV/Video unless the vehicle is stopped and the emergency brake is applied.

If the IVA-D300 is not installed correctly, the driver will be able to watch the DVD/TV/Video while driving the vehicle and may be distracted from looking ahead causing an accident. The driver or other people could be severely injured.

To display the DVD mode screen

To watch a video source, your vehicle must be parked with the ignition key in the ACC or ON position. To do this, follow the procedure below.

1.Push the foot brake to bring your vehicle to a complete stop at a safe location. Engage the parking brake.

2.Keep pushing the foot brake and release the parking brake once then engage it again.

3.While the parking brake is being engaged the second time, release the foot brake.

For automatic transmission vehicles, place the transmission lever in the Park position.

Now, the locking system for the DVD mode operation has been released. Engaging the parking brake can reactivate the DVD mode, as long as the car's ignition has not been turned off. It is not necessary to repeat the above procedure (1 through 3), of “To display the DVD mode screen.”

Each time the ignition is turned OFF, perform the procedure of “To display the DVD mode screen.”

If you try to activate the auxiliary device while driving, the display will show the warning-PICTURE OFF FOR YOUR SAFETY.

Caution

Not all functions will operate for every DVD. See the individual DVD’s instructions for details on the features supported.

Fingerprints on a disc may adversely affect playback. If a problem occurs, remove the disc and check for fingerprints on the playback side. Clean the disc if necessary.

If you switch the power or Ignition Key OFF or change sources during playback, playback will continue where you left off when you resume playback.

If you try to perform an invalid operation (based on the type of disc being played), the following mark is displayed on the monitor screen: To display the DVD mode screen

Play Position Memory Function

Even if you turn power off or switch the Ignition Key to OFF during playback or change the source, playback will continue from the point where playback stopped when the power is turned ON again.

17-EN
Page 19
Image 19
Alpine IVA-D300 Playing DVD/Video CD, To display the DVD mode screen, 17-EN, •Play Position Memory Function