Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.
Anynet+ Menu | Description | ||
View TV | Switches from Anynet+ to TV broadcast mode. | ||
Select Device | Your TV connects to the corresponding device. | ||
Record | Starts a recording. (This menu works only for a device supporting | ||
| recording.) |
| |
Menu on Device | Shows the menu of the connected device. | ||
| Example. When a DVD Recorder is connected, the DVD Recorder’s | ||
| title menu appears. |
| |
Device Operation | Shows the play control menu of the connected device. | ||
| Example. When a DVD Recorder is connected, the play control | ||
| menu of the DVD Recorder appears. | ||
Receiver | Sound is output through the receiver. | ||
Setup | You can set the environment for using Anynet+. | ||
TV Remote Control Buttons Available in Anynet+ Mode |
| ||
|
|
| |
Device Type | Operating Status | Available Buttons | |
| After switching to the | Numeric buttons | |
| device, when the menu of | ▲/▼/◄/►/ENTER buttons | |
| the corresponding device is | Colour buttons | |
Anynet+ Device | displayed on the screen. | EXIT button | |
After switching to the device, | ◄◄(Backward search) | ||
| |||
| ►►(Forward search) | ||
| while playing a file | (Stop) | |
|
| ► (Play/Pause) | |
Device with | After switching to the device, | CH ▲/▼ button | |
when you are watching a TV | |||
| programme |
| |
Audio Device | When a Receiver is activated | VOL +/- button | |
MUTE button | |||
|
| ||
➢The Anynet+ function only works when the remote control is set to TV.
➢The REC button works only while in the recordable state.
➢You cannot control Anynet+ devices using the buttons on the side of the TV. You can control Anynet+ devices only using the TV remote control.
➢Thedevice.TV remote control may not work under certain conditions. In this case, reselect the Anynet+
➢The Anynet+ functions don’t operate for the products from other manufacturers.
➢In Anynet+ mode, the colour buttons may not work properly.
➢The ◄◄, ►► operations may differ depending on the device.
Recording
You can make a recording of a TV programme using a recorder.
Press the REC button.
Recording begins. (Only when the Anynet+ enabled recording device is connected.)
➢The current TV programme is recorded in the Watching TV status. If you are watching video from another device, the video from the device is recorded.
➢You can also record the source streams by selecting Record after pressing the Anynet+ button.
➢Before recording, check whether the antenna jack is properly connected to the recording device. For the antenna connection to the recording device, refer to its user manual.
English - 48
