Fine Tuning Channel Reception
➢ Not available in DTV or external input mode.
If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store operation.
If the signal is weak or distorted, you may have to fine tune the channel manually.
1Press the MENU button to display the menu.
2Press the ▲ or ▼ button to select Channel, then press the ENTER/OK button.
3Press the ▲ or ▼ button to select Fine Tune, then press the ENTER/OK button.
4To obtain a sharp, and clear picture and good sound quality, press the ◄ or ► button until you reach the optimal setting. Press the ENTER/OK button.
➢ To reset the fine tuning to 0, select Reset by pressing the ▲ or ▼ button. Press the ENTER/OK button.
5Press the EXIT button to exit.
➢Fine Tune Store will change the colour of the Channel OSD (On Screen Display) from White to Red and add the “*” mark.
T V |
|
|
| Channel |
|
| |
|
| Country |
|
| : United Kingdom | ||
|
| Auto Store |
| | |||
|
| Manual Store |
| | |||
|
| Channel Manager |
| | |||
|
| Sort |
|
|
| | |
|
| Name |
|
|
| | |
|
| Fine Tune |
| |
| ||
|
| LNA |
|
| : Off | |
|
|
| Move | Enter | Return | |||
|
|
|
|
|
|
|
|
|
|
| Fine Tune |
|
| ||
P | 1 |
|
|
|
| +3 |
|
|
|
|
|
|
|
| |
|
|
|
|
|
| ||
|
|
| Reset |
|
|
| |
| Adjust | Save |
| Return | |||
|
|
|
|
|
|
|
|
P 1 *
Mono
Picture | : Dynamic |
Sound | : Custom |
SRS TS XT | : Off |
−− : −− |
|
LNA (Low Noise Amplifier)
This function is very useful in the situation that the TV is used |
|
|
|
|
| |
T V | Channel |
|
| |||
in weak signal. |
| Country | : United Kingdom | |||
LNA amplifies the TV signal in the weak signal area, a |
| Auto Store |
| | ||
preamplifier boosts the incoming signal. |
| Manual Store |
| | ||
| Channel Manager | | ||||
1 | Press the MENU button to display the menu. |
| Sort |
| | |
| Name |
| | |||
2 | Press the ▲ or ▼ button to select Channel, then press the |
| Fine Tune |
| |
|
| ENTER/OK button. |
| LNA | : Off | |
|
|
|
|
|
|
| |
3 | Press the ▲ or ▼ button to select LNA, then press the ENTER/ |
|
|
|
|
|
| OK button. |
| Move | Enter | Return | |
4Select Off or On by pressing the ▲ or ▼ button, then press the ENTER/OK button.
5Press the EXIT button to exit.
➢ Depending on areas, factory mode of LNA, will be set up as On or Off.
English - 17
