INSTALLING THE APPLIANCE
Selecting the location for appliance.
Install the appliance properly on the flat and firm surface.
Install appliance in the available space.
Allow 1 foot(30cm)from the ceiling, and 2 inches( 5cm ) from the wall.
About 30cm

SAFETY WARNINGS

About 5cm

About 5cm

Specification of electric power.

The electric power specification of the appliance is attached inside at the top of the door or outside at the back.

Do not use any extension cords or double adaptors.

Do not plug several appliances into the same multiple power board. This could cause over heating and the risk of fire.

Install appliance in the appropriate location.

Place the appliance away from sunlight or heat.

Install appliance in a damp place.

There is a risk of eletric shock or malfunctions.

Earthing the appliance.

If the socket is the 2-legged type, the appliance must be earthed.

Do not connect the earthing wire to the gas pipes or telephone lines.

Replacing the lamp.

1.Unplug the power cord from the socket.

2.Remove Chilled tray.

3.Unscrew by plus-type driver then take out lamp cover. (optional model only)

4.Turn the lamp counter clockwise.

5.Replace new lamp same specification as original one.

Warning ! : Disconnect power supply before replacing the lamp.