SETTING UP THE REFRIGERATOR

ICE MAKING

Step 1

Clean up inside of the refrigerator with a clean cloth.

Step 2

Insert the power plug into the socket while keep the door open for checking the interior light, Then turn the temperature control button to “MAX”.

Step 3

Close the door and let the refrigerator operate for 2-3 hours.

1)

Fill the ice tray with

 

water at about 80% of

 

its capacity, or at its

 

“water level” indicator.

2)Carefully place the ice tray on the freezer shelf otherwise the splashed water will be frozen and cause the ice tray is stuck hard.

3) Temp. Control For making quick ice cubes, the temperature

control button must be set to “MAX”

4)The water will become the ice cubes with in 3-4 hours. Please remove the ice tray by pulling it out. Never use any kind of instrument. This may cause damage on the freezer.

Step 4

Check the refrigerator temperature by touching inside the freezer.

5)

To take the ice cubes of the

 

the ice cube tray, you should

Step 5

gently twist the ice tray (As

shown), Do not bend it over.

The appropriate temperature should be

 

controlled by turing the temperature

 

control button to “4”, or the desired

 

temperature can be adjust. Now your

Wait 5

refrigerator is ready to work.

minutes

NOTE : After unplug the appliance, wait for about 5minutes before restarting.