![](/images/new-backgrounds/1281293/28129337x1.webp)
Required Tools (Not provided)
You need the following tools to complete the installation of your refrigerator:
Philips | Socket wrench | |
screwdriver (+) | driver | (13/32”) (10 mm) |
Pliers | Allen wrench |
|
(3/16”) (5 mm) |
| |
|
|
With the door opened
1.Remove 3 screws holding down the TOP TABLE ( 1 ) and separate the connected wires.
(1) | up |
| |
| setting |
2.Disconnect two connectors ( 2 ) on the left side door. To remove the water coupler from the hinge, twist and pull it from the hinge.
Remove the water line ( 3 ) while pressing the marked part ( 4 ) of the water line coupler.
(2)
(3) |
(4) |
3.Pull and remove the hinge lever ( 5 ). Remove the ground screw ( 6 ) attached to the upper left door hinges with a philips screwdriver (+). Remove the upper left and right door hinges ( 7 ).
(5) | (6) |
(7)
English - 19
2016. 12. 17. |
�� 9:01