USING THE COLD WATER DISPENSER
Using the Water dispenser (RF261B)
Place a glass underneath the |
|
water outlet and push gently |
|
against the water dispenser lever |
|
with your glass. Make sure the |
|
glass is in line with the dispenser | PUSH |
to prevent the water from |
|
splashing out. |
|
If you have just installed the refrigerator or installed a new water fi lter, Flush 11 L through fi lter before use (fl ush approximately 6 minutes).
Make sure water fl ows cleanly before drinking.
If you have a long vacation or business trip, CAUTION close the water valve and shut off the water
supply to the Refrigerator. This will help prevent accidental leakages.
Water clouding phenomenon
All water provided to refrigerators fl ows through the core fi lter which is an alkaline water fi lter. In this process, the pressure in the water that has fl owed out of the fi lter gets increased, and oxygen and nitrogen become saturated. When this water fl ows out in the air, the pressure plummets and the oxygen and nitrogen get supersaturated so that they turn into gas bubbles. The water could look misty due to these oxygen bubbles.The water may look temporarily cloudy due to these oxygen bubbles. After a few seconds, the water will look clear.
The water tank’s capacity is approximately 1 L. Please wait 1 second before removing the cup after dispensing water to prevent spills.
18_ operating
2012.6.14 10:53:9 AM |
