Samsung RF62HEPN RF62HEPN1/XEF, RF67DEPN1/SML, RF67DESW1/SML REASSEMBLING THE FRIDGE DOOR, setting up your refrigerator, 18

setting up your refrigerator

REASSEMBLING THE FRIDGE DOOR

1.Insert and tighten the screw into the left and right middle hinges with a philips screwdriver(+).

4.Place the hole in the bottom of the left door over the middle hinge.

7.Insert and tighten the ground screw into the left and right upper hinges with a philips screwdriver(+).

2.Insert and tighten the 2 hex head bolts into the left and right middle hinges with an allen wrench(Ø5mm).

5.Insert the left upper hinge shaft into the hole on the corner of the fridge door.

8.Connect the electronic wire on the top of the refrigerator.

3.Replace the middle hinge cap.

6.Insert the upper hinges into the holes at the top of the door.

Insert and tighten the 3 hex head bolts into the left and right upper hinges with a socket wrench(10mm).

9.Position the top table in place. Insert and tighten the 3 screws into the top table with a philips screwdriver(+).

18_ setting up