REMOVING THE FREEZER ACCESSORIES

1.Pull Out Drawer

To remove - Pull the drawer out to full extension. Tilt up rear of drawer and lift straight out.

(Refer to picture 1 & 2)

Open the freezer door fully and remove the drawer.

To replace - Place the drawer onto the rails by tilting it up. Lower the drawer into place until it is horizontal and slide the drawer in.

(Refer to picture 3)

1 1

22

33

2.Freezer Drawer Bin Swing-Type

To remove - Pull the drawer out fully. Tilt up the rear of the bin and lift it out to remove.

To replace - Place the bin into the rail assembly.

When replacing, place the drawer bin holder into the hole of the rail

Drawer-Type

1

2

To remove the drawer - Pull the drawer out fully. Tilt up the rear of the bin and lift it out to remove.

To relocate the drawer - Place the bin into the rail assembly.

Do not allow children to play with the refrigerator, as they could

CAUTION injure themselves or damage the refrigerator.

Do not sit on the Freezer door. The door may break. Do not allow children to climb into the Freezer basket.

Drawer

(RF67****)

If you remove the divider to clean the basket bin, you must reinstall the divider using 1 screw after WARNING cleaning to prevent children from getting trapped inside the basket.

32_ operating