REASSEMBLING THE FREEZER DOOR (DRAWER TYPE)

up

1.Pull out the rails to the full length on each sidle of the cabinet evenly.

4.Replace the drawer box.

Slot

setting01

2. Hang the freezer door

3. With the 10mm wrench,

front onto open slot on the

reattach 4 bolts to connect

sides.

the rail with the door.

REASSEMBLING THE FREEZER DOOR (SWING TYPE)

1.Place the hole in the bottom of the freezer door over the right side low hinge.

2.Replace the middle hinge connected to the freezer.

3.Insert and tighten the screw into the left and right middle hinges with a philips screwdriver(+). Insert and tighten the 2 hex head bolts into the left and right middle hinges with an allen wrench(Ø5mm).

4.Replace the cap on the middle hinge.

setting up _19