Twist Ice Maker Model

1.Pull out the Ice-cube trays.

2.Fill trays up to the water level mark(arrow).

3.Put the Ice-cube trays back in position. And close the freezer door.

4.Once the water has become frozen, turn the dials on the Ice cube trays to empty Ice cubes into the storage bin.

1 2

3

4

REMOVING AND RELOCATING THE FRIDGE ACCESSORIES

1. Door Bins

To remove - Simply lift the bin up

and pull straight out.

To replace - Slide it in above the desired location and

push down until it stops.

Injury may occur if the door bins are not firmly

CAUTION inserted. Do not allow children to play with bins. Sharp corners of the bins may cause

injury.

Empty the bin before adjusting it.

Dust removal method -Remove the guard and wash in water.

2. Fridge shelves

To remove - When pulling out the shelf, if it does not

slide out easily, lift it up slightly and pull

out again.

To replace - When pushing in the shelf, if it does not slide in easily, lift it up slightly and push in again.

The Glass shelves are heavy.

CAUTION Use special care when removing them.

3. Vegetable & Fruit Drawers

1

 

 

 

 

 

 

 

 

 

 

 

 

To remove - Pull the drawer out

 

 

 

 

 

 

to full extension.

 

 

 

 

 

 

 

 

Tilt up the front of

 

 

 

 

 

 

 

 

the drawer and pull

 

 

 

 

 

 

 

 

straight out.

2

 

 

 

 

 

 

To replace - Insert the drawer

 

 

 

 

 

 

 

 

 

 

 

 

 

 

into the frame rails

 

 

 

 

 

 

 

operating02

and push back into

 

 

 

 

 

 

 

place.

 

 

 

 

 

 

 

 

The drawers need to be removed before the glass shelf above them can be lifted out.

To get the best energy efficiency of this product, please leave all selves, drawers and baskets on their original position like as illustration in page 21

REMOVING THE FREEZERACCESSORIES

1. Pull Out Drawer

To remove - Pull the drawer out to full extension. Tilt up rear of drawer and lift straight out. (Refer to picture 1 & 2)

Open the freezer door fully and remove the drawer.

To replace - Place the drawer onto the rails by tilting it up. Lower the drawer into place until it is horizontal and slide the drawer in.

(Refer to picture 3)

1

2

3

1

2

3

2.Freezer Drawer Bin Swing-Type

To remove - Pull the drawer out

1

 

fully. Tilt up the rear

 

of the bin and lift it

 

out to remove.

 

To replace - Place the bin into the

2

rail assembly.

 

When replacing, place the drawer bin holder into the hole of the rail

operating _23