When selecting the temperature, the set temperature is displayed initially for 5 seconds, then the actual temperature is displayed.

(There may be slight difference between the set temperature and displayed actual temperature, but it will be corrected to the set temperature automatically.)

-The Freezer temperature will change depending on the number of door openings, quantity of food, ambient temperature, etc.

-The temperature display will blink when freezer temperature increases due to frequent door opening, keeping warm food, etc.

(Blinking will stop when the refrigerator reaches normal temperature. If for some reason it does not stop after a long period of time, contact a Samsung service center.)

4Fridge

If you want to control the fridge temperature, follow as below.

Press the Fridge Button (Refer the picture)

-The temperature can be set in 1ºC interval between 1ºC and 7ºC.

When selecting the fridge temperature, the set temperature is displayed initially for 5 seconds, then the actual temperature is displayed.

(There may be slight difference between the set temperature and displayed actual temperature, but it will be corrected to the set temperature automatically.)

-The Fridge temperature will change depending on the number of door openings, quantity of food, ambient temperature, etc.

-Temperature of each shelve or container in the fridge may be different.

-The temperature display will blink when fridge temperature is increases due to frequent door opening, keeping warm food, etc.

22_ operating

(Blinking will stop when the refrigerator reaches normal temperature. If for some reason it does not stop after a long period of time, contact a Samsung service center.)

5Power Cool

Press the Power Cool Button. (Refer to the picture.)

-The Power cool light on the display goes on (see the arrow mark) and this function begins to operate regardless of the set fridge temperature.

Press the Power Cool Button again to cancel this function.

-The light goes off and it operates at the set fridge temperature again.

The Power Cool function operates for 2 and a half hours regardless of the set temperature.

6E.Saver Button

Press the Energy Saver button for better energy efficiency. If water drops appear on the doors, turn the Energy Saver function off.

MAKING ICE

Auto Ice Maker Model

The ice maker will produce 8 cubes per cycle - approximately 100~130 cubes

in a 24-hour period, depending on freezer compartment temperature, room temperature, number of door openings and other use conditions. Throw away the first few batches of

ice to allow the water line to clear. Be sure nothing interferes with the sweep of the feeler arm. When the bin fills to the level of the feeler arm, the icemaker will stop producing ice.

After the icemaker has been turned on again, there will be a time delay before the icemaker resumes operation.

It is normal for several cubes to be joined together.

If ice is not used frequently, old ice cubes will become cloudy, taste stale and shrink. So if you don’t want to make ice, press the Ice Off button.

When “Ice making” function is selected,ice- making is priority, Then the temperature of freezer will be lower than the setting temperature. If you don’t need the “Ice making” function,please press the button of “Ice Off”, otherwise some noise from water valve may be occured. Failing to do so may cause noise.