Samsung RF858QALASL/ML manual Removing the Refrigerator Doors, Disassemble Refrigerator Doors

REMOVING THE REFRIGERATOR DOORS

If the refrigerator is too large to pass through your doorway easily, you can remove the refrigerator doors.

Tools you will need (Not provided)

Philips screwdriver	Flat-blade	Socket wrench
(+)	screwdriver (-)	(10 mm)
Pliers	Allen wrench	Allen wrench
	(4 mm)	(5 mm)

Disconnect power to the refrigerator before WARNING removing the doors or drawers.

•Be careful not to drop, damage or scratch the doors/drawers while removing them.

•Use care when you remove the doors/drawers. The doors are heavy and you could injure yourself.

•Re-attach the doors/drawers properly to avoid: -- Moisture from air leakage.

-- Uneven door alignment.

-- Wasting energy due to improper door seal.

DISASSEMBLE THE

REFRIGERATOR DOORS

1.With the door closed, remove the 3 screws holding the Top Cover (A) with a Phillips (+) Screwdriver, and then remove the Top Cover with the entire wire-harnesses attached.

		up
	A
2.	Press the white sleeve [D] of the Water Tube	01setting
	Separate the two connectors on the left door
	and the one connector on the right door.
	Coupler, and then separate the Water Tube [E].
	E
	D

E D

3. Pull up the Fixer Lever (B), and then pull it forward.

BB

4. Remove the Hinge (C).

C

5.Lift up the Fridge Door and take it off.

•While disassembling and reassembling CAUTION the door, make sure that the electric

wires are not peeled off.

•Do not let the door fall down.

setting up _17

DA68-02836S-07.indb 17 2015. 8. 26.

�� 4:38