Samsung RFG23UEBP1/XEO manual Disassemble the Freezer Drawer, Reattaching the Refrigerator Doors

3.Remove the 3 hex head bolts 7 attached to the upper left and right door hinges with a wrench (10 mm). With a Philips head screwdriver, remove the ground screw 8 attached to the upper left and right door hinges. Remove the upper left and right door hinges 9 .

8

7

9

DISASSEMBLE THE FREEZER DRAWER

1. Push the upper drawer in completely.

2.Remove the tilting pocket 1 by pulling on both brackets 2 upward at the same time.

4. Lift the door straight up to remove.

5.With a Philips head screwdriver, remove the two screws 10 attached to the lower left and right door hinges. With an wrench (5 mm), remove the two hex head bolts 11 attached to the lower left and right door hinges. Remove the lower left and right door hinges 12 .

12

10

11

1

2

3.Take out the lower basket 3 by lifting the basket up from rail system.

3

4. Remove four 10 mm hex-head bolts from both sides.

REATTACHING THE REFRIGERATOR DOORS

To reattach the fridge doors, assemble parts in reverse order.

1.The Water Line must be fully inserted to the center of transparent coupler (Type A) or the Guide Lines (Type B) to prevent water leakage from the dispenser.

Type A	Type B
	Dispenser
Center of Transparent	The Guide Lines
coupler

5. Lift the freezer door up from the rails.

Putting too much food into the freezer

CAUTION drawers can prevent the freezer from closing completely and can cause frost build-up.

16_ Setting up

DA99-03403B-18.indb 16 2017. 7. 26. ￿￿ 3:27