( 4 )
Lighting
Pressing the Lighting button turns on the Dispenser LED lamp (under the display) in continuous mode so that it stays on continuously. The button also lights up.
If you want the Dispenser lamp to come on only when some one uses the dispenser, press the Lighting button to turn the continuous mode off.
( 5 ) | The Power Cool function substantially speeds up the refrigerator compressor, causing the refrigera- | |
Power Cool | ||
tor to cool down rapidly to a temperature you choose. | ||
| ||
| When you press the Power Cool button, the Power Cool icon lights up. | |
| Power Cool is useful if you need to quickly cool items or need to cool the refrigerator rapidly if it has | |
| warmed dramatically (for example, if the door was left open). | |
| To turn off Power Cool, press the Power Cool button again. | |
| Power Cool turns off automatically after 2 1/2 hours to decrease energy consumption. | |
| When you turn on Power Cool, the refrigerator’s compressor speeds up and is louder than | |
| during normal operation. | |
|
|
( 6 ) |
| |
Ice Off | If you don’t want to make more ice, press the Ice Off button. | |
(Hold 3 sec for | Pressing this button 3 second locks the display panel and dispenser buttons so the buttons can not | |
Child lock) | ||
be used. | ||
| ||
| The Child Lock icon lights up to indicate you’ve activated the Child Lock function. | |
|
|
( 7 )
Cubed Ice
( 8 )
Crushed Ice
(Cubed) (Crushed)
Press the Cubed Ice or Crushed Ice button to select the type of ice you want dispensed.
Each time you press the button, the cubed and crushed ice modes alternate and the Cubed or Crushed ice icon lights up, indicating your selection.
If you don’t need ice, turn the function off to save on water and energy consumption (See Ice Off below).
( 9 )
Ice Off
If you don’t want to make more ice, press the Ice Off button.
The icon will light up and the
We recommend you stop ice making if the following occur:
-There is enough ice in the ice bucket.
-You want to save water and energy.
-Water is not being supplied to the refrigerator.
If the ice maker function is ON, and the water line is not connected, there will be a water valve noise from back of the unit.
Press the Ice Off (6) button until the Ice Off indicator ( 
) illuminates.
( 10 ) Filter
(Red)
(Reset the indicator)
Water filter usage
1.Normally the filter indicator is blue, yellow, or green when you purchase or install your refrigerator, depending on your model.
2.After you use about 1020 L of water, the filter indicator turns Light Pink. (about 5 months)
3.After you use about 1135 L of water, the filter indicator turns Red. (about 6 months)
4.Remove the old water filter and install a new one when the filter indicator is red. Reset the filter indicator by pressing Alam/Hold 3 sec for Filter Reset button for 3sec.
•If water is not dispensing or dispensing slowly, you need to replace the water filter because the water filter is clogged.
•Some areas have large amounts of lime in their water, which causes the water filter to clog more quickly.
