Samsung RFG28MESL1/XSG manual Disassemble the Freezer Drawer, Assemble the Freezer Drawer

DISASSEMBLE THE FREEZER DRAWER

1.Push the upper drawer in completely.

2.Remove the tilting pocket ( 1 ) by pulling on both brackets ( 2 ) upward at the same time.

1

2

3.Take out the lower basket ( 3 ) by lifting the basket up from rail system.

3

ASSEMBLE THE FREEZER DRAWER

To reattach the freezer drawer, assemble parts in reverse order.

ADJUSTING THE DOORS

Now that the doors are back on the Refrigerator, you want to make sure the Refrigerator is level so that you can make final adjustments. If the Refrigerator is not level, it will not be possible to get the doors perfectly even.

Insert a flat-blade screwdriver (-) into a notch on the left control lever, and turn it count clockwise to level the refrigerator. (You turn the lever clockwise to lower the refrigerator and counterclockwise to raise it.)

4.Remove four 10 mm hex-head bolts from both sides.

5.Lift the freezer door up from the rails.

10_ setting up

flat-blade Control screwdriver(-) Lever

Both control levers must be touching the floor CAUTION to avoid possible personal injury or property

damage because of tipping.

If the right side is lower, perform the same procedure, but with the right control lever.

DA99-03404E-12.indb 10 2016. 12. 2. �� 4:33