Samsung RFG28MESL1/XSG Parts and Features, Using the ice off function, Water clouding phenomenon

Models: RFG28MESL1/XSG

1 68
Download 68 pages 1.7 Kb
Page 16
Image 16

When you press the Test button, you will hear the refrigerator chime (ding-dong). When the chime sounds, release the Test button.

The chime sounds automatically again to let you know the ice maker is working well.

If a power failure occurs, ice cubes may melt CAUTION then freeze together when the power comes back on, causing the dispenser to be out of order. To prevent this problem, after a power failure, pull out the ice bucket and discard the

residual ice or water.

After you dump the ice from the ice bucket, CAUTION you should press the dispenser lever once

with the ‘ICE CUBED’ or ‘CRUSHED’ function ON. The ice maker will make new ice faster after you return the ice bucket in the refrigerator.

If you use all the ice at once, you must repeat Steps 2 and 3 on the previous page. However, only wait 8 hours before dispensing the first 4 to 6 ice cubes. This will replenish the ice cubes and ensure maximum ice production.

Using the ice off function

PULLPUSH

When selecting the Ice Off mode, remove all ice cubes from the bucket. If you are not using the ice dispenser, the ice cubes may clump together. Pull the lock lever forward to throw away ice cubes or remove clumped ice from the bucket. Push the bucket back until you hear a click.

If you have a long vacation or business trip, close the water valve and shut off the water supply to the Refrigerator. This will help prevent accidental leakages. Do not disassemble the Ice-maker personally. It may cause disorder. Do not wash or spray the ice bucket with water. Just wipe it with a dry cloth. In order to operate the ice-maker properly, water pressure of 138~862 Kpa is required.

16_ operating

Water clouding phenomenon

All water provided to refrigerators flows through the core filter which is an alkaline water filter. In this process, the pressure in the water that has flowed out of the filter gets increased, and oxygen and nitrogen become saturated. When this water flows out in the air, the pressure plummets and the oxygen and nitrogen get supersaturated so that they turn into gas bubbles. The water could look misty due to these oxygen bubbles.The water may look temporarily cloudy due to these oxygen bubbles. After a few seconds, the water will look clear.

Please wait 1 second before removing the cup after dispensing water to prevent spills. Do not pull out the lever dispenser after taking out ice or water. It comes back automatically. Ice is made in cubes.

When you select “Crushed”, the ice-maker grinds the ice cubes into crushed ice.

PARTS AND FEATURES

Use this page to become more familiar with the parts and features of the Refrigerator.

( 1 )

 

( 2 )

 

( 3 )

( 13 )

( 4 )

( 14 )

( 5 )

 

( 6 )

 

( 7 )

( 15 )

( 8 ) ( 9 )

( 9 )

( 10 )

 

( 11 ) ( 12 )

( 1 )

Light

( 2 )

FF Ice-Maker

( 3 )

Foldable-Shelf

 

 

( 4 )

Fixed-Shelf

( 5 ) Vertical Hinged Section

(6 ) Vegetable & Fruit Drawers

(7 ) Water Filter

( 8 )

Light

( 9 )

Auto Closer

 

 

( 10 )

Convertible Room

(11 ) Auto Pull Out Drawer

(12 ) Freezer Drawer Bin

(13 ) Fixed-Shelf

(14 ) 2 Step Foldable-Shelf

(15 ) Door Bins

DA99-03404E-12.indb 16

2016. 12. 2. �� 4:33

Page 16
Image 16
Samsung RFG28MESL1/XSG manual Parts and Features, Using the ice off function, Water clouding phenomenon