Samsung RFG297AA Installing the Water Line, Connecting the water line to the Refrigerator

INSTALLING THE WATER LINE

Connecting the water line to the Refrigerator.

There are several items that you need to purchase to complete this connection. You may find these items sold as a kit at your local hardware store.

1/4” compression nut	copper tubing
plastic tubing	ferrule	Plastic tubing	Compression nut
		(Supplied)
			(1/4”) (Supplied)
		Need to purchase	Compression fitting
			(Supplied)
			Compression nut
			(1/4”) (Not supplied)
			Plastic tubing
		Ferrule	(Not supplied)
		(Not supplied)
		Copper tubing
		(Not supplied)

1.Slip the compression nut through the supplied plastic tubing .

2.Tighten the compression nut onto the 1/4” compression fitting.

-If you are using copper tubing, slip the compression nut (not included) and ferrule (not included) on copper tubing (not included) as shown.

-If you are using plastic tubing , insert the molded end of the plastic tubing into the compression fitting.

3.Tighten the compression nut onto the compression fitting. Do not over-tighten the compression nut .

4.Turn water on and check for any leakage.

Only connect the water line to a drinkable water source.

If you have to repair or disassemble the water line, cut off 1/4“ of the plastic tubing to make sure you get a snug, leak-free connection.

PU G 01ESTTIN

Installing the water filter.

1. Remove the water filter cover( 1 )

2. Remove the fixed cap by turning it counter clockwise. Keep the cap in a safe place for later use if you don’t use the filter.

3. Remove the water filter from the box and put a

replacement indicator sticker on the filter as shown.
Place the sticker on the filter that dates six months in	2
the future. For example, if you install the water filter in
March, put the “SEP” sticker on the filter to remind you
to replace it in September. That way you’ll know when
it is time to replace the filter. Normally, a filter life is
about 6 months.

1

3

Sticker (month indicator)

Setting Up _19