Samsung RL41WCPS1/XEH, RL41WCPS1/BUL Preparing the FRIDGE/FREEZER, Using the Control Features

PREPARING THE FRIDGE/FREEZER

To prepare your appliance for use and to check that it is running correctly, take the following steps.

Install all shelves and compartments removed during transport in the correct positions.

Clean the fridge/freezer and accessories to remove any dust that accumulated during packing and shipping.

The interior light of the appliance will light up when fridge door is open.

Set the temperature control to the coldest temperature and let the refrigerator operate for one hour. The freezer should get slightly chilled and the motor should run smoothly with soft hum.

Your fridge/freezer is operated by a compressor which switches “Operation” to maintain the internal temperature. For the first five minutes after initial start-up, it may be slightly noisy. This is quite normal and does not represent a fault.

Store food once the temperature in the refrigerator is sufficiently low. It takes a few hours after starting the refrigerator to reach the proper temperature.

If the appliance does not operate correctly, check the electricity supply. If the problem persists, contact your dealer.

USING THE CONTROL FEATURES

A. Basic Model

➀

Operation Button

• If you want to turn off, keep pressing for 3 seconds.

	Do not disassemble the refrigerator with unit turned on.
Note	- It may cause electric shocks or other damages.

Temp. Control button

•Press the Temp. Control button to control the refrigerator temperature.

•Initially, the mid-point temperature setting is selected.

•There are five temperature settings, represented by five indicator lights (➀). When all lights are on, the temperature is at its coldest.

•Press the Temp. Control button one or more times until the required temperature is set.

•The freezer temperature will be adjusted automatically according to the refrigerator temperature.

•If you need to freeze large amount of food stuff, set the temperature of freezer compartment as the coldest temperature at least 24 hours before.

6