Samsung RM25KGRS1/XET, RM25KGRS1/XEH After adjustment, tighten the screws ➁ & ➂ in reverse order

Models: RM25KGRS1/XET RM25KGRS1/XEH

1 40
Download 40 pages 46.07 Kb
Page 24
Image 24

adjusting the HEIGHT between the doors

If the Arctic Select Zone Door is lower than the Fresh Select Zone Door.

adjustment part

Arctic Select Zone

Fresh Select Zone

1)Locate the height-adjuster () in the Arctic Select Zone. Unscrew the four phillips screws () slightly to loose the door.

2) Unscrew the adjuster-phillips screw () two times turns to rotate the adjuster.

3) Find the best adjuster-level to align the door gap.

CASE) The gap is about 2mm (0.08inch) as shown below.

gap

Arctic Select Zone Door

 

Fresh Select Zone Door

reference plane

-Rotate down the adjuster-face with +2.0 number to reduce the door gap.

-The number of the adjuster to rotate depends on the gap.

After adjustment, tighten the screws (& ) in reverse order.

NOTE

The adjuster in the Fresh Select Zone can be used in the same way.

24

Page 24
Image 24
Samsung RM25KGRS1/XET, RM25KGRS1/XEH manual After adjustment, tighten the screws ➁ & ➂ in reverse order