USING THE WATER DISPENSER

Filling the water

You can fi ll the water with the water tank sitting inside of the refrigerator or you can remove the water tank to fi ll the water.

Method 1

Fill the water through the hole on the top of the water tank.

If you pour the water too fast, water may overfl ow.

Method 2

1.Release the lock on the both side of the water tank to remove the lid on the water tank.

2.Fill the water in the water tank.

Do not put anything other than water in CAUTION the water tank.

REMOVING THE INTERIOR PARTS

Moveable deli bin

Pull the deli bin out fully then slightly lift it up to remove it.

Shelves

Gently lift up the shelves with both hands and pull it toward you.

(Glass shelf/Foldable shelf)

Drawers

Pull the drawers out fully then slightly lift it up

to remove the drawers. (Plastic drawer/Moisture control big box)

Getting water from the dispenser

Place a glass underneath the water outlet and push it gently against the water dispenser lever with your glass. Blue light will turn on when you push the lever.

Door guards

Firmly grab the door guards with both hands and lift it up gently to remove the door guards.

Make sure the glass is in line with the dispenser to prevent the water from splashing out.

Water dispenser may not be available depending on the model.

Water tank

Firmly grab the water tank with both hands and lift it up towards you gently to remove the water tanks.

Water tank may not be available depending on the model.

12_ operating

DA99-01950G-09.indb ￿￿1:12

13. 7. 2. ￿￿ 11:04

Page 12
Image 12
Samsung RR92EESL1/ZAM, RR82EETS1/FAL, RR92WESL1/MTR, RR92WESL1/SAH Using the Water Dispenser, Removing the Interior Parts