15.Take off the handle cover and remove the screws, make sure to detach the caps and the handle from the left to right side of the door.
(Make sure to cover the left side with detached caps.)
Handles may not have cover depending on the models.
19. Tighten 2 screws back to its place.
20.Detach the Fridge and the Freezer door gaskets and then attach them after rotating them 180˚.
01 SETTING UP
16.Switch the hinge cap and attach the front leg cover.
Carefully put the refrigerator door back on.
Hinge cap
17.Tighten the 3 bolts and then connect the wires back together.
Make sure your refrigerator is unplugged WARNING before handling electrical wires.
18.Connect the wire on the plastic cover and put the cover back to its original position.
•After reversing the doors, make sure the Fridge and Freezer door gaskets are
WARNING
properly arranged. If not, there might be a noise or dew formed which affects perfomance of the refrigerator.
LEVELLING THE REFRIGERATOR
If the front of the appliance is slightly higher than the rear, the door can be opened and closed more easily. Turn the adjusting legs clockwise to raise and
Case 1) The appliance tilts down to the left.
•Turn the left adjusting leg in the direction of the arrow until the appliance is level.
Case 2) The appliance tilts down to the right.
•Turn the right adjusting leg in the direction of the arrow until the appliance is level.
< Case1 >
< Case2 >
setting up _9
13. 7. 2. 11:04 |
