ADJUST THE CLEARANCE BETWEEN THE DOORS
Making small adjustments between doors.
Please open the doors and adjust the doors as follows:
Warning) When it comes to the caps, they are just for the packing.
So, throw them away after adjusting the heights the fridge doors.
1) Release the nut (①) on the lower hinge until the upper end of the bolt (➁).
First of all, remove the caps (➃) on the bolts at the fridge doors.
When you release the nut(①), use enclosed hex wrench (➂) to turn
NOTE the bolt(➁) a little counter clockwise to make the nut(①) loose with your fingers.
Adjustment part
➂ WRENCH
➃CAPS
➀NUT
➁ BOLT
➂ WRENCH
➁ BOLT
➂ WRENCH
2) Please adjust the height difference between the doors turning
the bolt (➁) turn clockwise( 
) or counter clockwise
( 
).
When you turn clockwise ( 
), the door goes up.
NOTE
3) After adjusting the doors, turn the nut (①) turn clockwise
( 
) until the lower end of the bolt, then tighten the bolt again with the wrench (➂) to fix the nut(①).
If you do not fix the nut (①) firmly, the bolt (➁) may be released.
NOTE
➀NUT
➁BOLT
28
