INSTALLATION OF THE WATER DISPENSER LINE
Connect the water line to the refrigerator.
1) Slip the compression nut and plastic ferrule through the plastic tube.
2)After inserting the sleeve, tighten the compres- sion nut onto 1/4” compression fitting(union).
Do not overtighten the compression
NOTE nut.
3) Slip the compression ferrule and nut on cop- per (or plastic) tubing as shown.
Tighten the comperssion nut onto the com- pression fitting(union).
4) Turn water on and check for any leakege.
NOTE Water line must be connected to drinkable water only
Compression Nut
Ferrule
Sleeve
Compression fitting
Ferrule Compression Nut
Install the water filter.
1)As shown, the fixed cap separates from the refrigerator by rotating it counterclockwise.
Remove the water filter from the box and put a month indicator sticker on the filter as shown.
Keep the cap(A) in a safe place for recapping, when NOTE you will not use the filter.
2)If the water filter was installed in March, put on the "SEP" sticker.
3)Remove the protective cap then position and insert the filter as shown.
4)Slowly turn the water filter clockwise 90º to align
the indication mark on the cover, locking the filter in posi tion. Do not overtighten.
SEPARATION
OF RED CAP
STICKER
(MONTH INDICATION)
(A)
COVER FILTER
ALIGN THE INDICATION MARK WITH LOCK POSITION.
Please check that the indication line aligns with the lock position.
NOTE
27