ADJUSTING THE HEIGHT BETWEEN THE DOORS
Making small level adjustments between doors
If the freezer door is lower than the refrigerator door.
If the freezer door is higher than the refrigerator door.
Adjustment location | Adjustment location |
Please open the doors and adjust the doors as follows: | |
1) Release the nut (①) on the lower hinge | until the upper end of the bolt (➁). |
When you release the nut(①), use enclosed hex wrench (➂) to turn the bolt(➁) a little NOTE counter clockwise. Loosen the nut(①) with your finger.
➂ WRENCH
➁BOLT
➀NUT
2)Please adjust the height difference between the doors turning the bolt (➁) clockwise(
) or counter
clockwise ( 
).
When you turn clockwise ( 
), the door goes up.
NOTE
➁ BOLT | ➂ WRENCH |
|
➀NUT
3)After adjusting the doors, turn the nut (①) clockwise( 
) until the lower end of the bolt, then tighten the bolt again with the wrench (➂) to fix the nut(①).
➂WRENCH
➁BOLT
INSTALLATION INSTRUCTIONS
NOTE
➀NUT
If you do not fix the nut (①)firmly, the bolt (➁) may be released.
27
