![- Leave the tap open until clean water is running](/images/new-backgrounds/68787/6878763x1.webp)
INSTALLATION OF THE WATER DISPENSER LINE
Select the location where the purifier is to install. (Model with the purifier)
-Cut the water line attached to the purifier to the appropriate place after measuring the distance between the purifier and the cold water tap.
-If you wish to reassemble the water inlet and outlet sides of the purifier during purifier installation, see the reference illustration.
LINE OUTLET
SIDE OF | 90 degree | |
PURIFIER | ||
|
PURIFIERREFERENCE
WATER
WATER INLET | COUPLER |
| |
SIDE OF PURIFIER |
|
Remove any residual matter inside the purifier. (Model with the purifier) - Open the main water tap to check whether water
is running through the water tube on the water inlet side of the purifier.
PURIFIER
- If water does not come out through the line, check whether the tap is open.
- Leave the tap open until clean water is running |
| |
out and any residual matter that built up during | WATER LINE | |
manufacturing has been removed. | ||
WATER | ||
|
Attach the purifier lock stations. | TWO PURIFIER LOCK | |
STATION | ||
|
-Hold the purifier lock stations in the appropriate position (under the sink for example) and fix it tightly into place where to screw.
TWO PURIFIER LOCK
STATION
32