INSTALLATION OF THE REFRIGERATOR
Checking the Dimensions of your Entrance Door
Check the dimensions of your entrance door to determine whether the refrigerator can pass through it.
|
| Model |
| RS275 / RS277 | ||
|
|
|
|
|
| |
|
| Capacity (Cu. Ft) |
| 26 | 1/2 | |
|
|
|
|
|
|
|
|
|
| Width |
| 35 | 7/8 |
Dimension | Case Height |
| without Hinge | 68 1/2 | ||
|
|
|
| |||
| with Hinge | 70 | ||||
|
| |||||
(inches) |
|
|
| |||
|
|
|
|
|
| |
| Depth |
| with door | 33 13/16 | ||
|
|
| ||||
|
|
|
|
|
| |
|
|
| without door | 30 | 1/2 | |
|
|
|
| |||
|
|
|
|
|
|
|
Selecting the Location for the Refrigerator
•Select a location with easy access to the water supply.
•Select a location with enough space for the refrigerator.
•Select a location which is not exposed to sunlight.
•Select a location with level floor.
• Before disassembling the freezer door, the water supply line needs to be disconnected.
NOTE | (If not, the water supply line can be damaged.) |
| |
• See “Separating the water supply line from the refrigerator” on the next page. | |||
| |||
| Allow sufficient space to circulate the air in the internal cooling system. | 2inches | |
| • If the refrigerator does not have enough space, the internal cooling system |
| |
| may not work correctly. |
| |
| Allow clearance to the right, left, back and the top when installing the |
| |
| refrigerator. This has the advantage of reducing power consumption. |
| |
NOTE | Do not install the refrigerator where the temperature will go below |
| |
50°F(10°C). |
| ||
| 2 inches | ||
|
| ||
| 0.1inch | ||
How to assemble the separable door handle
- Make sure the “UP” mark on the rear |
| Fix the handles to the doors |
| - Check the installation of the handles |
of the handle is facing right side up. |
| by sliding them down firmly. |
| by pulling them. |
|
| |||
- Match the upper and lower Handle |
|
|
| - If the handles are inserted properly, |
Locking Tabs on the doors to the |
|
|
| they should not move. |
handles. |
|
|
|
|
INSTALLATION INSTRUCTIONS
17
