INSTALLATION OF THE WATER DISPENSER LINE
Connecting to water supply line
| 1. Cold Water line | |
- Shut off the main water supply line and turn the Ice | 2. Pipe Clamp. | |
maker to the off position. | 3.Copper (or Plastic) line | |
4.Compression Nut | ||
| ||
- Locate the nearest cold drinking water line. | 5.Compression Sleeve | |
6.Shut Off Valve | ||
| ||
- Follow the instructions in the ice maker installation kit. | 7.Packing Nut. | |
|
Connect the water line to the refrigerator.
1)Slip the compression nut through the provided plastic tubing.
2)Tighten the compression nut onto the 1/4” compression fitting.
Refrigerator
Ferrule | Compression Nut (1/4 |
(Not Provided) | |
| (Provided) |
NOTE
Do not overtighten the compression nut.
Using Copper Tubing
-Slip the compression nut and ferrule on copper tubing as shown.
Using Plastic Tubing
-Insert the molded end of the plastic tubing into the compression fitting.
3)Tighten the compression nut onto the com- pression fitting.
4)Turn water on and check for any leakage.
| Compression Fitting |
| (Provided) |
| Compression Nut (1/4 |
| (Not Provided) |
Copper Tubing | Plastic Tubing |
(Not Provided) | |
(Not Provided) |
|
Household Water Line
INSTRUCTIONS
Water line must be connected to drinkable water only.
NOTE Cut off 1/4 inch of the provided plastic tubing squarely to prevent leaks when reconnecting.
Check the water supply line
INSTALLATION
Connect the water pipe with coupler and tap.
-Close the main water tap.
-Connect coupler “A” to the tap.
-Every joint should be protected with sealing tape.
WARRANTY INFORMATION
This water line installation is not covered by the refrigerator or ice maker manufacturer's warranty. Follow these instructions carefully to minimise the risk of expensive water damage.
Note:
If the coupler does not fit on the current tap, go to the nearest authorised service dealer and purchase the right couplers fittings.
CAUTION
The water line must be connect-
ed to the cold water pipe. If it is connected to the hot water pipe, it may cause the puri- fier to malfunction.
COUPLER “A”
TAP
27
