![](/images/new-backgrounds/1324300/32430071x1.webp)
PROBLEM
SOLUTION
Display does not | •• | Press the Reset button over one second to reset the memory. |
work! |
| With this, the user information is not to be reset. |
|
|
|
Photos not showing | •• | If the “Memory card is connected” messages do not appear on the screen, check if the |
with a memory card |
| memory type is SD / SDHC / MMC / HS MMC. |
connected. | •• | Check if there are photos or images stored in the memory card. |
| •• | Check if the images in the memory card are JPEG (JPG) types. |
|
|
|
The LCD screen turns | •• | This is a |
off frequently. | •• | At the |
|
|
|
There is an after | •• | Still images can cause permanent damage to the LCD screen. |
image or an edge line |
| When you select Screensavers, select a number of themes so the image changes frequently. |
left on the screen. |
| NOTE : Defects caused by this are not be covered by the factory warranty. |
|
|
|
The input point of the | •• | Run the Touch Screen Calibration function at the Settings. |
touch screen is not |
|
|
correct. |
|
|
|
|
|
After turn on the | •• | Click the “Dispenser OK” button which is at the bottom of display. |
power, is possible |
| If the “”Dispenser OK” button is changed to “Complete”, turn the power off and on again. It is |
to operate only the |
| correct to show the “Home screen”. |
dispenser selection |
|
|
button. |
|
|
|
|
|
36