Sealing guard (applicable models only)
To remove the sealing guard
Gently lift up the guard, and then pull it to the front while holding the bottom side.
To reinsert the sealing guard
1. Put the guard on the front of the housing. And then, insert the guard by lowering it.
2. Press both hooks on the guard to lock the guard. When the guard is locked properly, you will hear a clicking sound.
CAUTION
•Make sure the sealing guard is locked firmly. Otherwise, the guard may cause noise when you open or close the door.
Maintenance
English 55
|
| ||
|
| ||
|
|
|
|