INSTALLATION OF THE REFRIGERATOR
Checking the Dimensions of your Entrance Door
• Check the dimensions of your entrance door to determine whether the refrigerator can pass through it.
NOTE • Moving refrigerator through door if depth or width of refrigerator is bigger than door’s, removes refrigerator doors.
Selecting the Location for the Refrigerator
•Select a location with easy access to the water supply.
•Select a location with enough space for the refrigerator.
•Select a location without direct exposure to sunlight.
• Before disassembling the freezer door, the water supply line needs to be disconnected. (If not, the water supply line can be damaged.)
CAUTION • See “Separating the water supply line from the refrigerator” on the next page.
Allow sufficient space to install the refrigerator on a flat surface.
• If your refrigerator is not level, the internal cooling system may not work correctly.
When you install the refrigerator, it is recommended that the clearance be maintained as much as specified below.
NOTE To get the sufficient Energy efficiency, keep the clearance of the back side more than 10Cm and follow the Loading Plan.
To get more space remove the upper box in the freezer and all boxes in the fresh food compartment since it does not effect satisfactory thermal and mechanical characteristics.
| • Be careful when you openÄ the door in full |
| swing.Ä It might come in contact with its adja- |
Loading Plan | CAUTION cent units. |
For fitting proud of adjacent units
940mm
600mm
600mm
at least 26mm
at least 26mm
428mm | 501mm |
940mm
125o125o
INSTALLATION INSTRUCTIONS
19
