Samsung RSE8K manual Connect the water line to the refrigerator, Check the water supply line, Case

INSTALLING OF THE WATER DISPENSER LINE

Connect the water line to the refrigerator

-Slip the compression nut and plastic ferrule through the plastic tube.

-After inserting the sleeve, tighten the compres-sion nut onto 1/4” compression fitting(union).

Do not overtighten the compression nut.

NOTE

-Slip the compression ferrule and nut on copper(or plastic) tubing as shown.

Tighten the comperssion nut onto the com-pression fitting(union).

- Turn water on and check for any leakege.

Compression

Nut

Ferrule

Sleeve

Compression

fitting

Ferrule

Compressi on Nut

Waterline must be connected to drinkable water only

NOTE

(Case 2)

Check the water supply line

Connect the water pipe with coupler and tap.

-Close the main water tap.

-Connect coupler “A” to the tap.

-Every join should be protected with sealing tape.

WARRANTY INFORMATION

This water line installation is not covered by the refriger-ator or ice maker manufacturer's warranty.

Follow these instructions carefully to minimise the risk of expensive water damage.

Note:

If the coupler does not fit on the current tap, go

the nearest authorised service dealer and purchase

the right couplers fittings.

CAUTION

The water line must be connect-ed

to the cold water pipe.

If it is connected to the hot water

pipe, it may cause the purifier to malfunction.

COUPLER “A”

TAP

INSTALLATION INSTRUCTIONS

29